Jump to content
SAU Community

Defects

wallystyles

By wallystyles,
in Queensland

 Share

Recommended Posts

wallystyles Enthusiast

wallystyles

Posted
Posted

i had just knocked off work and drove home i pulled into my driveway and looked in my revesion mirror abd saw a cop car i hoped out and said what was the problem as i hadnt sped on the way home he just looked at me and licince please then he said lift the hood so i did and striaght away he lokked at my blow off vale looked at my inter cooler and my turbo and told me that i wasent allowed to have these on my car i told him it just got rebuiled and thats the way they builed them then he was looking at my tyres as i have a widebody kit with 335/35/17 on the back and he said there should be somthing on my car that tells you what size tyres you are suposed to have on your car then he said i needed to crash test my car i said what are you talking abot then he asked me if my car had air bags i said no i was arguing with him for a bit cause i think he didnt know what he was talking about cause he had to ring someone and ask about what he chould do so he write me out a ticket to go to the queensland transport forthem to look at suspect emisson control and suspect suspension modifications but then to make things worse he told me that he was going to tell all the officers about my car and where i live and that every time the see my car they will pull me over this is fu.ked up has any had this problem or somthing like it that could help me

here are my mods got gt35r turbo apexi pfc with hand controller front mount intercooler 2.5 inch exhaust do i need a mod plate

post-8385-1129018589.jpg

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/
Share on other sites
wallystyles Enthusiast

wallystyles

Posted
  • Author
Posted (edited)

i had just knocked off work and drove home i pulled into my driveway and looked in my revesion mirror abd saw a cop car i hoped out and said what was the problem as i hadnt sped on the way home he just looked at me and licince please then he said lift the hood so i did and striaght away he lokked at my blow off vale looked at my inter cooler and my turbo and told me that i wasent allowed to have these on my car i told him it just got rebuiled and thats the way they builed them then he was looking at my tyres as i have a widebody kit with 335/35/17 on the back and he said there should be somthing on my car that tells you what size tyres you are suposed to have on your car then he said i needed to crash test my car i said what are you talking abot then he asked me if my car had air bags i said no i was arguing with him for a bit cause i think he didnt know what he was talking about cause he had to ring someone and ask about what he chould do so he write me out a ticket to go to the queensland transport forthem to look at suspect emisson control and suspect suspension modifications but then to make things worse he told me that he was going to tell all the officers about my car and where i live and that every time the see my car they will pull me over this is fu.ked up has any had this problem or somthing like it that could help me

here are my mods got gt35r turbo apexi pfc with hand controller front mount intercooler 2.5 inch exhaust do i need a mod plate

Attached thumbnail(s)

post-8385-1129030341.jpg

Edited by wallystyles
Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1634876
Share on other sites
shif_tea Grand Master

shif_tea

Posted
Posted

That was the hardest SINGLE sentence i've ever had to read....

Fullstops are your friend. After reading it i could'nt really tell what you were saying, but basically for most mods you need an engineering certificate to make them legal.

Some you won't be able to get engineered but probably have to talk to someone in the know to find out which ones.

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1634936
Share on other sites
Frink Veteran

Frink

Posted
Posted (edited)

get your car and your mods engineered, so that if this ever happens again, you can just flash the engineering certificate in the cops face and tell them to f*ck off!!! :) theres not much they can do then......

Edited by Frink
Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1635451
Share on other sites
666DAN Grand Master

666DAN

Posted
Posted

I rang the special mods number and was told after market ECU's are fine, as long as they don't make the emissions worse. This is the general gist of most of the modification rules, you can't change anything that causes a detrimental effect to factory emissions/safety features.

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1635465
Share on other sites
Bobjones Mentor

Bobjones

Posted
Posted
get your car and your mods engineered, so that if this ever happens again, you can just flash the engineering certificate in the cops face and tell them to f*ck off!!!  :P  theres not much they can do then......

Agreed...and thanks for the 2 threads and long sentences...

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1636012
Share on other sites
scathing Grand Master

scathing

Posted
Posted
get your car and your mods engineered, so that if this ever happens again, you can just flash the engineering certificate in the cops face and tell them to f*ck off!!!  :)  theres not much they can do then......

Your naivety is so cute.

The cops can still hand you a defect notice regardless of if you have an engineering certificate or not. People seem to forget that what the cops issue is not an authoritive ruling that your car is not legal - its just that they suspect that the car may not be, and they would like someone to go check.

With an engineer's certificate they're less likely to hand you one, especially if you're being polite, but give them reason enough and they'll just write on the notice that they suspect your parts have been modified beyond the scope of what was certified originally (and, don't forget, they only have to "suspect" that its not compliant), or they've degraded since the signatory saw them (just like defecting a dead stock car) and chances are the notice will stick.

Of course, if you really give them attitude they could always "suspect you of doing burnouts", and under the burnout law (which requires no proof, just suspicion) they can impound your car instead of letting you drive it home.

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1636821
Share on other sites
nismo33 Proficient

nismo33

Posted
Posted

Now that is PHAT...

easiest solution would probably be --umm.. sell your car to me and get yourself a commonwhore -- im sure they wont be pulling u over ever again.--LOL.

seriously -- sell your car to me and i'll get it engineered.-- im pretty sure you can get away with 17 rims but i dont know about the 335 wide then again they are cops -- i got defected for my tyres that was 2mm too big being a 265/35.-- WHAT THE HELL IS 2mm..?????

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1637024
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Depends on the engineer i guess.... For me its free cause my dad has an LB1 licience.... But for everyone else a mate at work got his auto/manual conversion inspected onsite at work and the paperwork done for $95... The guy who did it took about an hour to do it so i thought $95 was fair for an onsite....

Link to comment
https://www.sau.com.au/forums/topic/90744-defects/#findComment-1640720
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...