Jump to content
SAU Community

Recommended Posts

Heres a group buy for DBA 4000 series slotted rotors.

If I can move 10 sets (40 rotors) then we get the good price ;)

(Note - pairs can be purchased instead of a full set.)

dba4000.jpg

INFO:

All are the 4000 series slotted only.

R32 GTST (RB20DET)

Front (280mmx30mm) - $195.00each

Rear (297mmx18mm) - $195.00each

R33 GTST (RB25DET)

Front (296mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DET) non v-spec brembo

Front (296mmx32mm) - $200.00 each

Rear (297mmx18mm) - $195.00each

R32 GTR (RB26DETT) V-spec brembo

Front (324mmx30mm) - $220.00each

Rear (300mmx22mm) - $195.00each

R33 & R34 GTR run the same brakes as the R32 GTR v-spec brembo.

Also Available :

R31 Skyline

Front slotted (non 4000 series) $150.00each

Rear slotted (non 4000 series) $150.00each

350Z (normal brakes)

Front (296mm x 24mm) - $195.00each

Rear (292mm x 16mm) - $205.00each

350Z (brembo brakes)

Front (4 piston 324mm x 30mm) - $220.00each

Rear (2 piston 322mm x 22mm) - $220.00each

More info at the DBA website

SHIPPING:

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Postage to Perth - Darwin - ACT - Alice, is a flate rate $44

The rotors are fairly heavy so all will be sent via courier.

FINISH DATE :

Ends - 25th Oct 05.

Payments due - 30th Oct 05.

Im getting 2 full sets (for me and a mate) so we only need to move 8 sets (16 pairs).

1/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

2/ gR33ddy - R33 GTST (2xF & 2xR) - PAID - sent.

3/ mass_iv - R33 GTST (2xF) - PAID - PAID - sent.

4/ YLD-CHLD - R32 GTR (2xF & 2xR) - PAID - sent.

5/ SirSkyline - R33 GTST (2xF) - PAID - sent.

6/ Pretender - R33 GTST (2xF & 2xR) - PAID - sent.

7/ nisr32 - R32 GTST (2xF & 2xR) - ??????????????

8/ gR33ddy - R32 GTST (2xF) - PAID - sent

9/ private buyer - R33 GTST (2xF) - PAID - sent.

10/ Chicko's GTR32 - R32 GTR (2xF) - PAID - sent.

11/ shif_tea - R33 GTST (2xF) - PAID - sent.

12/ gtrGhosTDoGG11 - R33 GTST (2xF) - ??????????

:)

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

are these the kangaroo paw ones????

if so and for $200 each ill take a set of front discs, not sure if its r32GTR or r33GTST yet....

Yep, they are the kangaroo paw ones.

Link - 4000 series spec sheet

I'll include you in the list of buyers - you can confirm which type you require at any time.

:)

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

thanks Paul hope we reach 10 buyers, also wats the price without the group buy????

im still looking into what brakes are on my car so i have to go and measure the rotors....

PM sent.

oh and Paul when do you think the due date for payment will be?

Payment can be made at anytime.

A couple of guys will be paying in about a week which is ok.

PM me when you are ready and I'll forward payment details.

Once your payment has been received your rotors will be sent.

Cheers :(

hey i would also like to know the price without group buy on r34 gtt front set

cheers,

R34 GTT (RB25DET)

Front (310mmx30mm) - $200.00each

Rear (297mmx18mm) - $195.00each

Postage for 2 rotors direct is $22

Postage for 4 rotors direct is $33

For Melb - Syd - Adel - Canberra - Bris metro (country extra $5)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • If there's oil in with the clutch, I hope it finds its way out even if that hole has a cover/grommet 😛 I don't want oil near my cars clutch! 😛 Interested to hear the answer about covering it, I'm assuming a bung for a gearbox from another car that has a grommet to suit.
×
×
  • Create New...