Jump to content
SAU Community

Recommended Posts

Can u guys help me out on this one because ive got no idea. Ive got a sky and need some help on the fluids that are recommended for it.

I know that engine oil should be changed every 5000kms with good full synthetic oil as well as have the oil filter changed.

What about

- transmission oil

- radiator coolant

- power steering fluid

- brake fluid

Can u use any type of fluid or do u have to use special ones that are specifically designed for high performance cars???

Some recommendations on the fluids u guys are using for your Lines would be appreciated

thanks

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/
Share on other sites

I use Silkolene DOT4 for my brakes. Its damn good compared to the crappy Mobil and Castrol that regular auto shops stock.

Good sources for quality fluids, both transmission and brake, is motorbike shops. They stock really good brands like Motul, Belray and Silkolene. One type of racing brake fluid Silkolene make retails for about $38 for 500ml's! I use the cheaper $16 dollar one which is good enough for most people id say.

Generally i change brake fluid once a year, but I dont do alot of motorsport, so it tends to get changed when I can feel the pedal is horrible. :D

I use Mobil 1 10W/30 in my Skyline for engine oil.

Red17

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-136994
Share on other sites

So engine oil doesnt really matter which ones u use just as long as they are full synthetic rite?

thanks for the brake fluid tips i think ill hope down to my local bike shop and pick up a bottle of that stuff.

With transmission oil and brake fluid do u have to flush it or can u just top it up???

Sorry to be a hassle but one more thing guys...do you have to flush the radiator coolant or can u just top it up with Nissan's radiator coolant when it gets low

Thanks again

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-137497
Share on other sites

You can just top it up I'd say...but every now and then (maybe once a year) do a full flush, because often stuff can just sit at the bottom of the radiator. Once i thought my radiator was clean (and the water was), and heaps and heaps of crap came out of it.

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-137553
Share on other sites

Skyline_Paul: I just changed the oil in my gearbox and they feel as smooth as silk. I used Caltex Gearlube 70w-90 coz thats what they recommend for the car and its well worth it (used about 3.5 litres)... no more nasty clunking. For the engine I used 5w-40 Full synth (nearly used 5 litres). For the gearbox all you need is a 1/2 inch rachet (the square bit opens the bung) and the motor you need a 14mm ring spanner or rachet depending on what you perfer.

Filter for motor No. 145a

Petrol Filter Z200

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-147598
Share on other sites

Hey Sumo thanks for the help i havent yet changed anything on my car yet...since i just got it the other week

just wondering how long should u leave it until u have another gearbox oil change? (kms??)

and also are u from the west cause i need some help...i am crap when it comes to car engine maintenance

cheers

=)

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-150214
Share on other sites

Im in Country NSW. Near Tamworth.

If you had all the filters and oils would only take half a day to do max.

Changing the oil in my Diff today, EP 85w-90 was recommended for the R32 GTR, but it reads its not recommended for LSD's? Im not sure whether the R33 is a LSD or not?.

Sumo

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-152089
Share on other sites

  • 2 weeks later...

Oil Filter = Z145a

Fuel Filter = Z201

Air Filter = A360

If you have and Auto you are best to change the Trans Fluid and filter every 50,000k's. If you have and LSD, which all Turbo Skylines have you should change its fluid with the trans flud. An lsd is almost useless if the Fluid is maintained. Manual Trans Fluid should really be changed at 50,000 to 60,000k's also just to b safe, especially if you drive it hard. Coolant Should be changed every 2 to 3 years and Brake Fluid every 2 years. Power steering fluid really should last you 100,000k's.

Im fairly sure the pads on all skylines are:

Front = DB1170

Rear = DB1220

Discs; (Not 100% sure if these are right for r32 GTST)

Front = DBA4963

Rear = DBA908

I use NGK BCPR6EVX Plugs in my R33, but if you drive hard you should use a 7 heat range. BCPR7EVX

Link to comment
https://www.sau.com.au/forums/topic/9101-engine-fluids/#findComment-169010
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...