Jump to content
SAU Community

Recommended Posts

My mate has a 89 prelude with h22a vtec in it wif a haltech comp. exhaust and big extractors. It does go quick i will admit but he reckons he has 156kwatw but wont show me a dyno sheet. n he does speak a lot of shit but he is deadly serious that he thinks he will beat my R33 gts-t. all though i only have a BOV im thinkin that there is no way that this could b true. Just want 2 no how true this is?

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/
Share on other sites

i believe the other cars ive seen as there are dyno sheets for them. but just couldnt c him beating me as its a front wheel drive NA with only simple mods n mines a rear wheel drive with forced induction

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/#findComment-1644737
Share on other sites

My mate has a 89 prelude with h22a vtec in it wif a haltech comp. exhaust and big extractors. It does go quick i will admit but he reckons he has 156kwatw but wont show me a dyno sheet. n he does speak a lot of shit but he is deadly serious that he thinks he will beat my R33 gts-t. all though i only have a BOV im thinkin that there is no way that this could b true. Just want 2 no how true this is?

BOV isnt a "Go fast" mod. Just gets rid of the pressure on the intake manifold.

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/#findComment-1645181
Share on other sites

is nissansilvia down or something? why are all the boyracers making stupid threads on here?

Steal your mates car, take it to the drag stip, get a timeslip, end your arguement.

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/#findComment-1645202
Share on other sites

Your mate is full of shit. There is no way his car has that much power with so little mods.

Dyno readings don't mean shit mate. You could set up the dyno so your friends car would make 300kw if you wanted to.

My S13 made 160rwkw on one dyno when it only had full exhaust and pod, there is no way my car had that much power with so little mods. Don't always believe dyno readings...

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/#findComment-1645641
Share on other sites

Take it to the track..... Only way to sort it out.

Werd! When the flag drops, the bullsh*t stops.

Until then tell your mate that you've got a gazilion HP at the rear wheels and cops fly. :lol:

Link to comment
https://www.sau.com.au/forums/topic/91309-is-this-bullsht/#findComment-1645680
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...