Jump to content
SAU Community

Recommended Posts

R34 GTR front:

GTR_004.sized.jpg

R34 GTR rear:

GTR_005.sized.jpg

Front end external differences:

- Bonnet (shorter and aluminium (std, Vspec, M-spec) or carbon fibre (VspecII, M-Spec optional))

- Front bar

- Front air guide (Vspec+)

- Front lip with plastic front underbody tray

- Pumped lightweight alloy guards

- 18 x 9 wheels with 245/40R18 tyres standard

- Brembo 4 piston caliper brakes

- Larger brake rotors

- Front mounted intercooler

- GTR badging

Rear end external differences:

- Rear bar

- Spoiler - Adjustable wing

- Carbon fibre rear undertray (VSpec+)

- Pumped rear moulded guards

- Brembo 2 piston brake calipers

- Larger brake rotors

- 18 x 9 inch wheels with 245/40R18 tyres standard

Needless to say there's a hell of a lot more different apart from the externals

The GTR has a higher nose. Ie; the bit of the bonnet just behind the headlights is higher above the ground than the equivalent in GTT.

I think it adds to the muscular look but it's probably just there to fit more stuff under the bonnet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...