Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Im new to the forum just got myself a kick ass Skyline GT-T R34 through jlimports.com.au the guy there james helped me out heaps every step of the way and i save myself a lot of cash, looked at getting through autoworx but i found myself saving about $1500 through these guys.

I have a few japanese housemates, and they all tell me the same thing. 80K on a car that's 10 yrs old? Extremely Rare. They agreed if the car was based in tokyo, then it would be possible, but if the car is based in the suburbs and all, it's highly impossible, the odometer would definitely be tuned. And this is comming from pple who are from Japan. I agree that there are cars with low kms, but it's rare. Most of the logbooks and stuff are faked too from what they say. So it really depends on your luck if you get a true k's or a faked k's. There's a way to tell if it's real or faked, something to do with taking out the speedos i think.

Cheers! =)

<snip>

So it really depends on your luck if you get a true k's or a faked k's. There's a way to tell if it's real or faked, something to do with taking out the speedos i think.

Cheers! =)

If the kms are wound back say a small amount, there's probably no way to tell, but if they've been wound back a lot, it's of course easier. I've been told it's quite easy to tell based on the condition of the interior. Even if they have been wound back 10,000km, it's not that much anyway.

I was talking to a guy a few weeks ago that has been importing cars for about 6 years now (and imported over 250 cars), he was saying that things like the handbrake boot on average will start to split a little at around xx,xxxkm, the steering wheel will start to show wear at xx,xxxkm, series I R33 seat bolster shows wear at xx,xxxkm, series II R33's seats wear at around 15,000km less than series I, etc etc and continued on - to give about 6 or 7 examples of how you can tell whether the km's are roughly genuine or not.

As he said, "We can tell you whether we believe that the km's are genuine, but can never be 100% certain"

As long as when I import a car, I find that the conditon of the car matches the kms, I'll be happy.

A workshop in Perth is just waiting for an inspection in the next 2 to 4 weeks and they will be able to comply R32's (1992 plus) and compliance should be priced well but a lot more work goes into a car then the 15 year rule.

Is there a differance between the 89/90/91 models and the 92 plus? besides the type-m editions etc?

just wondering for those people who get R33 compliance, what did you pay for? i know it;s around $4K plus GST, anyone find it cheaper?

it funny that people charge different price for a same model car...

i got quote for jza80 from downunder for 4.5k and my friend got it for 3.5k, may be r33 can be get it cheaper? they got 100 plates per year....

If the kms are wound back say a small amount, there's probably no way to tell, but if they've been wound back a lot, it's of course easier. I've been told it's quite easy to tell based on the condition of the interior. Even if they have been wound back 10,000km, it's not that much anyway.

I was talking to a guy a few weeks ago that has been importing cars for about 6 years now (and imported over 250 cars), he was saying that things like the handbrake boot on average will start to split a little at around xx,xxxkm, the steering wheel will start to show wear at xx,xxxkm, series I R33 seat bolster shows wear at xx,xxxkm, series II R33's seats wear at around 15,000km less than series I, etc etc and continued on - to give about 6 or 7 examples of how you can tell whether the km's are roughly genuine or not.

As he said, "We can tell you whether we believe that the km's are genuine, but can never be 100% certain"

As long as when I import a car, I find that the conditon of the car matches the kms, I'll be happy.

This is exactly what the guy at autoworx told me. I reckon the handbrake boot is a pretty good indicator, I noticed once at another prominent dealership that all their Skylines had the handbrake boots removed. The rubber on the pedals is another good indicator and also look for the timing belt service sticker.

Im new to the forum just got myself a kick ass Skyline GT-T R34 through jlimports.com.au the guy there james helped me out heaps every step of the  way and i save myself a lot of cash, looked at getting through autoworx but i found myself saving about $1500 through these guys.

JL Imports have only been a company since April this year so not exactly a company that has been around a while and I would love to have the choice of 100,000 to 150,000 vehicles in a week when I am looking for cars.

"With our service we can provide you access to 100 - 150,000 vehicles available each week at auctions all over Japan."

More "Brokers" popping now then ever and how could you save $1,500 as you could only say that if you were quoted on the same car and why was their $1,500 difference.

Who complyied your car and what did they charge.

  • 4 weeks later...

It's been a while since anyone posted on this thread, but I thought I'd let you guys know that I've just picked up a car at yesterdays auction... 1996 GTS-t Series 2, 2Dr Manual, grade 4.5... with 20,960 kms. Not one blemish on the entire body (not one single mark shown on the auction sheet), Grade B interior, Aftermarket exhaust, clutch, adjustable suspension. Should have it on the road for just over $22K

So to those people who said that you cant get a car with low kms, this is proof that you can... if you are patient. This car took 5 weeks to find which was actually quicker than I expected.

I initially had a requirement of under 50,000km so when I managed to get this I was extremely pleased, especially when it's a grade 4.5

To nelleh and everyone else - Good luck in your searching. You WILL find exactly what you want if you're prepared to wait.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...