Jump to content
SAU Community

Recommended Posts

Hey,

I had a small ding on my door and a tiny bit on my front panel from a hit and runner that I finally decided to get fixed. I took it to a panel shop close by and got a quote for $675 if I paid cash. I take the car in Monday morning and am assured I will have it for the weekend.

Friday 4:30 comes around and I get a call saying they have realised the colour is a 3 layer pearl job (the car is bayside blue) and it will take longer. They say I should have been quoted closer to 1500 and it will take till Monday.

They call Monday at 4:30 eight days after I took it in and say that it will be the $675.

I go and pick up my car just as the panel shop was closing and when I got home I notice that there is a drip at the bottom of the door, and also there is a tiny bit where the paint wasn’t done properly near the fold of the front panel where it meets the door.

At a glance it looks like a good job, but I really was expecting it to be a quality job as the place had all those banners saying there were approved by all the big insurance companies.

They also drove my car 2km when I specifically told them not to drive the car out of the business yard because I had a blown turbo gasket.

I am going to take it in tomorrow morning before my appointment at a performance workshop and see what they have to say.

Is it reasonable of me to expect a clean quality job? And for them to not drive my car around?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/92325-just-had-some-paintwork-done/
Share on other sites

It is 100% reasonable, just have a nice chat to them they will probably fix it up for you, if they refuse well you will have to fight it out.

i find that you usually have to stress the fact that you want a perfect job and you WILL be unsatisfied if anything is wrong before they start.

I would be pissed if they drove my car more than they had to, i would expect a couple of hundred metres at most when moving it around every day but not a few km..

when u say that they sed 675 cash, does that mean without a receipt? or did they give u one

if they did give u have a very good leg to stand on to get it redone properly

if not u may be fighting a battle

one thing i always do if i take my car somewhere is do somethin like unplug the ecu or set a rev limit... take out the afm or even the plug on the afm. stops they from driving it or doin anything u dont want them doin

Usually if you are nice about it they will fix it up for you. I've had cars back to panel shops and when they realise their error they are quick to fix it up for you if they value your business.

If you go back there and swear and cause a big fuss straight away theyre not going to want to help you.

One full week also isn't really that much when you're asking for a cash job. To give you a cheap cash price they put your car at the low end of their priorities list. Some guys on the forums have had 4 - 6 week waits for paint. This is doubly evident since they didnt even realise the paint would require more work until Friday arvo.

As for the driving around - thats kind of unecessary - but if they were having to move the car all week to on-street parking like a lot of busy paint shops do it couldve clocked up the 2k's just driving up and down the street they're on looking for free spots.

Went in this morning and they said they will redo it, really happy about that.

Seems like a bad way to run a business, could have just done it properly the first time.

I was given a reciept for the "cash job"

Because they said they would fix it up right away i decided not to mention the 2km on the clock. When I take it back I am going to write on a post-it note that I know the km and to not drive it out of the yard, and stick it on the dash.

Edited by tdawg

man i hate these places that do lousy jobs, go back there and tell them to fix it up

i get places driving my car around and put excessive k's on it. i havnt really bothered in taking note of k's but next time i will and if they drive it im cracking the shits

2k's is a fair way to drive a car. i wouldnt expect them to have to move it that much and would be very sceptical about their resoning if they gave me one.

as for the shoddy work i would definetly be back there looking for some answers. you payed good money for a job that you expected to be well done and of top quality. i wouldnt expect any less

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
×
×
  • Create New...