Jump to content
SAU Community

Recommended Posts

Hi all,

I've got all tomorrow off work, so i'll be heading out to WSID. I'll be at the gates at 4:45pm as i'd like to get in early.

If anyone see's me, feel free to come say hi.

I've just got a R33 GTS-T with an exhaust and Falken Ziex tyres, so i'm not expecting good times, but it will be good fun..

Hope to see some of you there ;)

Regards,

Tommo.

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/
Share on other sites

It was a pretty good night, although damn hot and humid, which my stock side mount didn't like too much at all.

Managed to get a 14.3 @ 96mph anyway.

R33 GTS-T with turbo back exhaust, 8psi, and falken Ziex tyres.

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1669171
Share on other sites

Not bad, do you have nails in both tyres as i saw both sparking? Im guessing these were 2nd gear burnouts.

How many runs did you get in?

Yeah 2nd gear burnouts... I think in the right one I just had a rock because that was the only time it did it... so dodgy though - so i've booked in to get new tyres on Tuesday :) Both tyres only spark in the first video (tommowsid.avi)

Managed to get 5 runs in, between 6pm and 8:30pm (at that point, my tyres were pretty much bald and it wasn't going to get any colder :))

I'd also gotten 96mph in EVERY one of my runs, just with a different 60ft time.. I figured the only way I was going to get faster is with a better MPH, which just wasn't going to happen.

DSC_1738.jpg

Edited by TommO
Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1671348
Share on other sites

Funny you say about 2nd gear burnouts, but i started doing these and on every occassion i couldnt grab 3rd gear on my run. I thought something is wrong with the box and i started to get quotes on a new gearbox. So next runs, i swapped back to only 1st gear burnouts and now i hit 3rd gear every time. Weird hey

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1672727
Share on other sites

I had no problems selecting gears throughout the run? Sucks to hear about that problem, I haven't experienced that though.

Wilch: I know what you mean, I read that too, so I played around with it myseld. In the end, the bigger burnout I did, the better 60ft I was getting. Thats the thing, the Falken Ziex's have a very very high temperature rating as to when they become sticky, and the big burnouts got them there :) I tried a little first gear burnout on my first run and it spun a lot off the line... :O

edit: I got a best of 2.100 60ft time.... not too great but not too shitty either :D

Edited by TommO
Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1673203
Share on other sites

Believe me, a 2.1 60" on those rubbish tyres is pretty good. The best I could manage on the same tyres was a 2.2 with plenty of 2.3-2.5's in there for good measure. Whether I did a burnout or not didn't really make any difference to my times.

A set of sticky tyres would drop you into the 13's without any problems at all - they basically dropped me from a 13.7 to a 12.9 (with a few other small mods).

Back on street tyres though, what are you replacing the Falkens with Tommo?

I'm going to get rid of mine as well, just trying to get another opinion on what tyres to replace them with (was thinking either Toyo T1R's or Goodyear Revspec RS-02's).

Link to comment
https://www.sau.com.au/forums/topic/92456-wsid-261005/#findComment-1673570
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...