Jump to content
SAU Community

Recommended Posts

Hi guys...

Today I went to Jim Murcott adv driving course. and I had a great time.

Found out more things that can happen to you and your car in an unexpected situation. At least I know my ABS is working perfectly, and it does help to steer you out of trouble under hard braking.

All braking and dodging & swerving exercises were done within 50, 60 and 65 km/h speed, but I really notice that how much harder it is for everyone (incl me) to get their cars stop or swerve in time to avoid hitting that "imaginary truck" markers, when the speed is only differ by 5km/h.

We were split up to 3 groups, there's 2 nice 200SX there, a Sylvia, my R33, and the rest were like Lancers, Futura, Excel and Gemini. What amazes me is with the correct technique, a lady in her old Gemini can stop and swerve in time to avoid hazards way much better than some blokes in their Lancers.

I didn't hit any cones at all for the rest of the day, although I still feel that I can perform better. I think I will be doing the 2nd level course for more challenging manouvres.

Good stuff! NSW guys did one a while back which consisted of racing techniques too. Like I say, if you can afford to get FMIC, BOV's and all that, I'm sure you can afford an advanced drivers course cause it's way more valuable.

ive done one of these and found it pretty boring!! i did mine through ammi which is rated the best apparently....the only thing i really learned was that my car could accelerate the fasted into a corner and continued to accelerate the fasted out of the corner(hair pin) without spining into the gravel!.... hicas whohahahahha :spank:

Akeenan,

Did the course you do was held by AAMI thru Jim Murcott or just by AAMI?

Sometimes it could also depend on the instructor. On the day, we got Peter Barr, who really makes a difference since he's got quite a sense of humour and it makes the whole day easier and more interesting.

And yea I did heard comments like "do you believe all this craps?" from some young blokes there, but when they did their run, hit a couple of markers. If they were so good and thinked the course was a crap, why can't they control their "hot" lancers to avoid the markers properly? It wasn't that hard believe me, even a young lady in her old Gemini can beat them hehehe :P

I admit might be boring for some as it's not as racing style as some thinks.. but for me, maybe this course could save me out of trouble, in case a wombat jump out in front of my car. This is just my opinion.

Go to http://www.murcott.com.au/vic.html and check what's the next available date is. I think there's 1 tomorrow but it may be too late for you to register. Next one is Monday 2nd of Feb 2003.

Remember, you MUST do the 1st basic defensive driving course before they allow you to do the 2nd level. Cost $275 for level 1 and $286 for level 2. You can go to Motorsport straight away ($330) but I prefer to do level 2 first, to gain better confidence in myself, beside I wanna know how I can cope with doing a 75-100km/h highway manouvres, wet slalom etc in level 2, before going to motorsport, which may expose me to even higher speed...

Maybe I should get speed delimiter before doing motorsport course? Meanwhile I'm planning to do Level 2 at end of March.

Cheers,

Rianto

I don't think that is a very good way thou, coz if he talks more abt ur/his car than ur driving... than he may not be putting 100% of his time to pass valuable knowledge to you.

Our instructor never made any comments on any of the cars that ppl drive on that day whether that's a ford xy gtho, a gemini, skyline, 200sx or etc. He purely concentrate on how u drive, he even knows within split seconds that I steered first than braked later, when I'm suppose to do the otherwise (brake first then swerve)... and he was even standing outside the car and me passing him at 65km/h, not sitting in the car.

Check if your AAMI course gave you a certificate and can be recognised by Jim Murcott course, if so, then maybe you can go straight to Level 2 or Motorsport.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...