Jump to content
SAU Community

13.4 second 1/4 for your 'stockish' R33. (A how to guide).


Recommended Posts

i got a 13.981 at calder last night... could have probably done better, but happy for a first real strip run. Set my 235/45 tyres to 16psi and I have pineapples on the back - seem to have less traction probs than some of the other gts-t boys who also ran.

Originally posted by predator666

i got a 13.981 at calder last night... could have probably done better, but happy for a first real strip run. Set my 235/45 tyres to 16psi and I have pineapples on the back - seem to have less traction probs than some of the other gts-t boys who also ran.

What mods do you have??

a few :P its not really "stockish" though as the thread indicates...ah well..

S-AFC, cold air intake, dump pipe, hi-flow CAT, HKS Super Dragger II cat-back, blitz pod, HKS FMIC, ProfecB EBC, heavy duty clutch, pineapples, zeal coilovers, falken 235/45R17.. stock ECU, stock Turbo @ 13psi

i think some heat buildup and trying a bit too hard could have effected my later runs.. i'm gonna wrap some of my piping soonish to maybe fix that for next time.

thanx :( other runs were around mid-14 at higher MPH (~100).

Its all in the takeoff, which i'm sure you know, but its definitely what I found out on friday. The difference between a 14 sec run and a 13 second run is all in a good takeoff.

Easier just to just post the timesheet with the 60', etc.

http://www.skylinesaustralia.com/forums/at...=&postid=259667

If I can get that a bit lower (which I think I can next time), I think I may be able to get about a 13.6 or something with a perfect launch and my current mods. I'll be happy with that until I one day I upgrade the turbo, ecu and maybe a couple of other things which should push me into the 12's. 12's for a daily driver that is RWD would be pretty nice I reckon :(

anyway, enough about me.. back to general discussion

yeah.. other runs were worse launches, but better shifting after that, resulting in higher top speed of around 101mph

If i can pull both off in the one run i'll get somewhere around the mid-13 i think as well.. tyre pressure could have been a bit low @ 16psi for street tyres??

I ran 14.370 @ 98.79, 60' 2.407 with a pod (no cai) and a 3" cat back zorst. I believe that 60' time could come down a few tenths with a bit of practice (I only had 3 runs on the day).

I just dont get it. predator666 you've got some decent mods I'm guessing they'd be around $2k rrp? Surely to goodness your $2k mods are more than 0.3sec better than my $400 mods? It looks like you can launch it better than I can also.

A question for all: How much did you spend (and on what), and what affect did it have on your times???

Most of the stuff came on my car.. but if u added them up prolly $6000-$7000 or so :P read back a page for the full list. 0.3 is a reasonable difference.. and 1 second is a massive difference in terms of what you need to do to your car most of the time.

That run i felt like a pretty perfect launch, and i took it a lot more easy on the gear changes afterwards. Maybe i backed off right at the end? (no idea). Anyway, its all in the timesheet up above, i'm no expert, and i don't remember every single detail! I only had about 4 runs.. next time i go, i'll hopefully have some more runs, and hopefully get a better time as a result of the practise.

Guest MFX_R33

Waming up your tyres with a burnout is good for show, but not really going to help you on street tyres.

I ran at eastern creek again last night and got a 13.102 @ 108.46 mph, killing my old time of 13.7 @ 105. I was much happier. My 60ft this time was much better, of 2.114 over 2.365.

I walked away grinning from ear to ear (I was hoping for a 13.4) :) :) .

Jeff.

Guest MFX_R33

I have standard internals, injectors and fuel pump. I am running a custom plenum, XF trottle body, FMIC, EMS management, high flowed turbo (metal wheels, no bb centre), running 17psi boost, exhaust, etc.. The tyres are 255/35R18 Fulda street tyres let down to 20psi.

Here is a pic of my engine bay,

http://www.mfx.com.au/team/prgen.jpg

Jeff.

Guest MFX_R33

They are close but still handling it. We have looked at them closely on the Dyno, but they are still upto the task at the moment. I am looking at a bigger turbo at the moment, so I will have to do something about the fuel system soon.

Jeff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...