Jump to content
SAU Community

Recommended Posts

Guest Pearman

Hi,

I have been told that during winter months, salt is used to breakdown ice on japan’s roads. I’m also told that this leads to higher levels of rust in jap cars.

Questions,

What do you guys think? Found much rust in your cars?

If so, where are the problem areas / common places to checkout?

I also here that AM body kits are sometimes used to hide rust, etc

Any comments…

Thanks

Pearman

Link to comment
https://www.sau.com.au/forums/topic/9324-rust/
Share on other sites

It doesnt snow that much in Japan. The mainland and the south in particular (where the most people live) is more prone to temperate/sub tropical climate which has typhoons and torrential rain in winter, humid wet summers.

Sapporo however is usually covered in snow during winter, but thats about 1.7 million people out of 126 million. Not that many cars really :P

I dare say the problem exsists, but its probably fairly uncommon. If your worried, id check things like chassis rails and subframe parts.

Red17

Link to comment
https://www.sau.com.au/forums/topic/9324-rust/#findComment-140159
Share on other sites

Yeah just have a good look under the the car... ie subframe etc...

I checked out mine before i bought it and was really impressed with the condition of the car in terms of rust, mainly because i found absolutely none... japan would be alot less harsh in terms of rust than us here on the east coast of australia i think?

Link to comment
https://www.sau.com.au/forums/topic/9324-rust/#findComment-140171
Share on other sites

Originally posted by red17

It doesnt snow that much in Japan. The mainland and the south in particular (where the most people live) is more prone to temperate/sub tropical climate which has typhoons and torrential rain in winter, humid wet summers.  

Sapporo however is usually covered in snow during winter, but thats about 1.7 million people out of 126 million. Not that many cars really :)

It sounds like you know alot about Japan, but I'm confused. Have you ever been to Japan?

I just came back from two weeks in Japan where I was based in Tokyo and backpacked around north and south of the main island. I caught the Shinkansen to Hiroshima, Kyoto and Nagano.

It was snowing all the way to Hiroshima (Kyoto is on the way), it snowed in Nagano (obviously), and even snowed in Tokyo the day after I left.

From my brief experience and most importantly talking to people who live there and/or have family there, it seems that Japan sees a LOT of snow in their winter.

Link to comment
https://www.sau.com.au/forums/topic/9324-rust/#findComment-140201
Share on other sites

Originally posted by red17

Ok maybe im wrong then, damn university education lets me down again. These authors of text books should really stop publishing lies  

Red17

BA (Geography)

hehe...

Makes sense, my degree was full of outdated procedures and programming languages... Silly University :)

In any case, as I said, I was only there for two weeks, so I'm hardly an authority on Japan, but the impression that I got was that they get their fair share of the white stuff ;)

Link to comment
https://www.sau.com.au/forums/topic/9324-rust/#findComment-140227
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...