Jump to content
SAU Community

Recommended Posts

List on first post has been updated :sorcerer: , if anyone finds any errors or has more to add, let me know!!

Also if you know the link to any threads that should be added to any item on the list let me know - meaning any further discussions or instructions as such...

i know for a fact that R32 rear seats and Cefiro rear seat are the same, but the R32 seats arent made to fold down. In regards to R33 i know that a Rear R32 GTR seat will not fit in a R33 so im assuming that an R33 seat wont fit in a cefiro... if you understand how i put that together :D

Funky: why go through the trouble of retaining the original connectors.. why not just cut the wires and crimp on new but connectors thats what i did, i thought it to be easier... and more time consuming, is there a reason for your madness?

here is one more

  • 2 weeks later...

Add onto radiators please:

The radiator for the A31 20DET isn't same as R32 20DET, though they are direct swap (Something like A31 uses single core and R32 is twin core??).

CA S13 also fits, but that would be a downgrade, might get you out of a tight spot if you are stuck on the side of the highway or something?

R33 GTST rad+shroud (bigger than R32) fits into A31 but will not fit into S13 (fouls on bonnet). Have to make new top brackets for R33 rad.

EDIT - Thanks :/

Edited by daisu
  • 2 weeks later...

i need new brake pads all round for my ceffy. Its a Rb20det factory manual.

I went to my mates hop and looked thru there entire bendix catalouge and could not find the code that is quoted on first page for cefiro brakes.

Are SR s13 ones the same?

Can sum1 hit me up wit part numbers asap as i need new pads b4 car goes for licensing next week.

cheers mike

if in doubt, always best to just remove your current pads...take them in, look thru the catalog and match them up. Have a look at the s13 sr20 ones first - maxima - r31 etc...should be close....person at the shop if they have any idea should be able to match them up.

Edited by skypy12

This part isn't a substitute for cefiro.. but it fits anyways.

Cefiros and i think laurels are equipped with gas struts to hold the bonnet up. R32s and S13s use a rod to prop the bonnet up.

I've noticed on most cefiros that the gas struts are either rooted, or well on their way out. This is a royal pain if you are doing work under the bonnet.

The bonnet prop from the R32 fits straight into the cefiro, there are factory mounting holes for the prop to sit in the rad support and bonnet. Takes 5 mins to install.

Heaps less work than completely removing the bonnet while you work in the engine bay, and alot cheaper than replacing your gas struts

:cool:

i need new brake pads all round for my ceffy. Its a Rb20det factory manual.

I went to my mates hop and looked thru there entire bendix catalouge and could not find the code that is quoted on first page for cefiro brakes.

Are SR s13 ones the same?

Can sum1 hit me up wit part numbers asap as i need new pads b4 car goes for licensing next week.

cheers mike

I'm quite sure that A31 RB20DET brakes are equivalent to S13 SR20. I had A31 Non-Turbo, and the brakes were equivalent to S13 CA. As skypy12 said you should be able to match the pads up if you take them into a shop.

Edited by daisu
  • 2 weeks later...
  • 3 weeks later...

Anybody have a pic of the Laurel Dash in a cefiro? or just the dash in general i can usually look outside at someones car but there seams to be a shortage of laurels in the immediate area...

This part isn't a substitute for cefiro.. but it fits anyways.

Cefiros and i think laurels are equipped with gas struts to hold the bonnet up. R32s and S13s use a rod to prop the bonnet up.

I've noticed on most cefiros that the gas struts are either rooted, or well on their way out. This is a royal pain if you are doing work under the bonnet.

The bonnet prop from the R32 fits straight into the cefiro, there are factory mounting holes for the prop to sit in the rad support and bonnet. Takes 5 mins to install.

Heaps less work than completely removing the bonnet while you work in the engine bay, and alot cheaper than replacing your gas struts

:O

I got a new set of struts through Nissan and cost me 165 dollars each :O I would have got them regassed but the guy who owned the Laurel before me used vice grips on the strut rod to hold up the bonnet which damaged the rod and f@#ked the seals. ;)

  • 2 weeks later...
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...