Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 2 weeks later...
Hey from Canada! Do you guys know what the part number for the windsceen on an a31 is? (if glass has a part number) Glass isn't my specialty. Or, does anyone know what substitutes there is? Like an e90's maxima?

Just go to a auto glass fitter and give them the model number (Nissan A31 Cefiro) they should be able to get one in if they dont already have one. I Aus the place I rang had one in stock ;)

Give it a go, or alternatively go to nissan.

Just go to a auto glass fitter and give them the model number (Nissan A31 Cefiro) they should be able to get one in if they dont already have one. I Aus the place I rang had one in stock :P

Give it a go, or alternatively go to nissan.

Hey, thanks for the tips. I apreaciate any help. But the Cefiro was not exported to Canada and it is very rare in canada. I imported my car strait from Japan, there is maybe 10-20 in all of Canada. (I'm probably wrong but you get the idea). I go to a nissan dealer and they look at me like, wtf is a cefiro, lol. But I have been looking around at local autoglass shops...Maximas windscreens don't fit, there about 6 inches wider.

Anyone know if a s13 windscreen fits?

No, things like windscreens are car specific if the maxima was locally delivered to your country then they would be able to get you a windscreen cos the maxima is the cefiro, it's the same thing really...

No, accualy the Maxima and the cefiro are not the same until 1992, which would be the A32. Which is too bad cuase, like I said, even though the 90 maxima is very close, it's about 6 inches to wide. You are right, windsceens are very specific. Guess I have to grab my wallet and order one from Japan.

  • 4 weeks later...
  • 1 month later...
hi,

exhaust question here for Cefiro:

Dump pipe/front pipe, will a aftermarket R32 one fit?

also, cooler kits....will a R32 fit?

thanks

If going for Aftermarket goto Reinhard they make a specific Cefiro front pipe. (www.hipowerracing.com - Contact Ivan).

Any FMIC cooler will fit with enough cutting and shutting of the front bar... if talking about piping, the R32 piping needs to be cut slightly. EG: Pipe which goes across the front of the engine and then joined with a silicon pipe for example.

ALSO>>> Hand brake cable? Part No.? Alternative car for straight fit?...

If going for Aftermarket goto Reinhard they make a specific Cefiro front pipe. (www.hipowerracing.com - Contact Ivan).

Any FMIC cooler will fit with enough cutting and shutting of the front bar... if talking about piping, the R32 piping needs to be cut slightly. EG: Pipe which goes across the front of the engine and then joined with a silicon pipe for example.

ALSO>>> Hand brake cable? Part No.? Alternative car for straight fit?...

R32 handbrake goes into laurel so i would assume its the same.

  • 5 weeks later...

R34 gtt stock sidemount intercooler is pretty much a straight swap into a ceffy. You use the ceffy bracket and cut of the piece for the snorkel off with a hacksaw. You also need to cut a section of of the splash guard cause it sits lower than the stock one.

The ceffy sidemount set up is very similar to the r33 and r34 not r32

R34 gtt stock sidemount intercooler is pretty much a straight swap into a ceffy. You use the ceffy bracket and cut of the piece for the snorkel off with a hacksaw. You also need to cut a section of of the splash guard cause it sits lower than the stock one.

The ceffy sidemount set up is very similar to the r33 and r34 not r32

is there much difference in cooling efficiency from the r34gtt item over the stock ceffy item?

is there much difference in cooling efficiency from the r34gtt item over the stock ceffy item?

yea i noticed much greater pulling power when boost kicked in and esp after 5000 revs when i was finding mine was dropping off as a result of the increased boost i had, and there was no lag difference. Plus they are rated for up to 200kw ...so i figured i would try it instead of a big front mount. At the moment i dont think i will be going over the 200kw mark so i thought it was the best option for now. There are acouple of threads in the forced induction section on this.

http://www.skylinesaustralia.com/forums/in...l=r34+sidemount

http://www.skylinesaustralia.com/forums/in...l=r34+sidemount

Edited by Resin

cheers for that Resin, read both those threads. were pretty interesting. You have me hooked on getting one now! Espec that i'm not after huge power figures either and i also get that same drop in power after a bit of revs. Don't seem too pricey either.

Edited by skypy12
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...