Jump to content
SAU Community

Recommended Posts

Hi all Computer wizards.

My desktop finally needs replacing.

So I have decided to go with something that can run games well.

After short research I am thinking of an Athlon 64 dual core 3800 (or 4000 single)

Asus A8N mother board SLi

Geforce 7800 GT PCI express and normal stuff (1g ram, Sata2 drive etc)

Things I am not sure of is dual core or not.

Or go cheaper 256 cards and run two (figure the better crads will drop in price later for this option).

Think dual core will be good for future games when written for it.

So thinking of spending $2000 there.

Next is I would like some opinions on LCD monitors.

Looking at 19 inch. Wide screen might be nice as I will probably have HDTV tuner card as well. So needs DVI inputs. I know 8ms and 700:1 ratio is all good stuff to have.

Keen to know what people have seen work well. Opinions are also good if well reasearched. There seems so many formats out there.

Thanks

In adavance.

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/
Share on other sites

Get 2 gigs of ram, one isnt enought these days. Games like fear and BF2 use over a gig of ram when you have high detail on.

Samsung 19inch 4ms lcd moniors go for $550 these days. Lower the ms the better for games.

Dual core is the way to go, ive got one myself and a 7800gt will run any game nice and fast with all the goodies turned on.

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1688772
Share on other sites

Don't bother going SLI with dual 7000 series cards, you will always be CPU bound. No current CPU can provide enough grunt to drive them.

Ronin is correct about the RAM.

Also there are no games currently that take advantage of dual core CPU. Synchronising the threads for a game is an absolute bitch and no-one has even attempted to yet. In light of this it would be more worthwhile to buy the fastest single core instead of going dual core.

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1689661
Share on other sites

i run 1gb of ram fine - how ever i have DDR2...

2gb would be even better again.

$2000 will put together a very very good computer.

i paid $1000 for the following:

prescott 3.2ghz p4

asus p5gd2-x

1gb 533mhz ddr2 ram

200gb hdd

256mb 6600gt eagle video card

the motherboard has a decent 7.1 built in sound, and a nice case will set you back a bit too (ie. thermaltank etc)

so for $2000 build a nice f**k off machine!

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1696200
Share on other sites

I'd have to agree with NJR about the SLI. It's pointless going for it because new technology is released for each vid card revision ie Pixel Shader 3.0, DirectX10 [soon] etc so you may as well go the best single card you can. If you take a look around overclockers.com for reviews you'll see that a single 7800GTX beats two 6800Ultras so the cost difference doesn't justify buying two.

Also with the dual core, it really depends if your new comp is intended to be gaming specific. Dual core has shown promising results for video editing etc but again as NJR said, current games haven't generally taken advantage of the multiple cores. Reviews suggest that an X2 4800+ will out perform an FX55+ but as you're looking at the lower models you're probably better off going a single core [4000+] Personally I'd try to stretch my budget for an X2 4200 or 4400+ though.

Sorry for all the rambling lol hope you end up with a beasty pc :D - Come play css sometime!

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1697768
Share on other sites

For a monitor, get an LG, 19'' LG.....cant go wrong man they r leet.

Also if ur plannin on a new comp, live dangerously....(Dont get dual 256 cards - waste of time), go with the 7800.

If you wanto be really leet, im talking king of games.

Dual 7800gtx

Fx57

I think i just creamed :)

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1705934
Share on other sites

These components from my system cost $3420 , check it out for an idea

DFI Lanparty nForce4 SLI-DR

AMD Athlon64 3700+ SAN DIEGO S939

OCZ PC3200 1024MB EL DC VX CL2

BFG 7800GTX OC PCI-E (probably one of the more expensive 7800's at $950)

Seagate 250G, 7200.7 NCQ

Western Digital 36G, 10k rpm

Enermax 600W Noisetaker

Lian Li PC60 Plus

Samsung 913N 19" 8ms

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1713789
Share on other sites

im suprised no one has mentioned the ATI radeon x850 cards. I bought a radeon x850 xt PE a month ago and it goes real well with these new games. Has faster core and memory speeds than the 7800 gtx card

im also running a 6800 in my notebook with details turned up high and still runs smooth

a question, how do u run 2 video cards in 1 pc?

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1731707
Share on other sites

If you want to get a dual ATI card setup you have to buy a newly revised motherboard with the RX200 chipset. No other boards will run ATI in crossfire mode.

I think the new DFI SLI-DR Expert has fixed the SLI problems as well as spacing the cards 1 slot further apart. My board is the older model and has the slots too close so 2x6800 Ultras don't fit too well

Link to comment
https://www.sau.com.au/forums/topic/93557-gaming-computer/#findComment-1745162
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...