Jump to content
SAU Community

Recommended Posts

But you havent tuned the AVCR with the Tial wastegate?

I am pretty sure it will have to be retuned to suit the differences between the wastegates.

yea it has to be touched up but it still should hold boost when it's switched off and it's not, i dunno what the f*&^%kn problem is but it's frustrating the shit out me

Cheers

anthony

Ok guys

all fixed after spending damn near 2 grand i found the problem.

First i got the car retuned, changed the cat, changed oil, sparkplugs, oilfilter, changed coilpacks, chanhged wastegat, all to find out it was the damn airfilter!!!!!!

2 grand for a Farkin $$140 airfilter all fixed and now pulls like a bitch! got the car retuned and she made 251.9 rwkw off 18psi and we tuned it back to 241.3rwkw off 16psi cause it started runin a little lean the good old RB still has it nin her!!!

Hitman said that once we get the fuel problem fixed should be able to make about 255 -260 safley and about 290rwkw off race fuel on 25psi.

all in all i'm damn happy with the car now and all that's said and done Hitman is a genious when it comes to EMS's

Well thanks for all the reply's guys.

Cheers

anthony

Edited by black sky
Ok guys

all fixed after spending damn near 2 grand i found the problem.

First i got the car retuned, changed the cat, changed oil, sparkplugs, oilfilter, changed coilpacks, chanhged wastegat, all to find out it was the damn airfilter!!!!!!

2 grand for a Farkin $$140 airfilter all fixed and now pulls like a bitch! got the car retuned and she made 251.9 rwkw off 18psi and we tuned it back to 241.3rwkw off 16psi cause it started runin a little lean the good old RB still has it nin her!!!

Hitman said that once we get the fuel problem fixed should be able to make about 255 -260 safley and about 290rwkw off race fuel on 25psi.

all in all i'm damn happy with the car now and all that's said and done Hitman is a genious when it comes to EMS's

Well thanks for all the reply's guys.

Cheers

anthony

by airfilter do u mean that the intake pipe between the maf sensor and the turbo inlet was sucking closed?

by airfilter do u mean that the intake pipe between the maf sensor and the turbo inlet was sucking closed?

Na i got a metal pipe comin off my turbo to the airfilter and cause i got a microguess it just runs off a map sensor. I have no idea why it caused such a problem.

I was takin out the wastgate again to see if it was that. the gasket fell underneath the air filter and it wasn't on the ground, so i took the air filter off and procedded with the wastegate. the wastegate was fine and i forgot to put the airfilter back on, took the car for a drive and it was fine talk about lucky!!!!

Edited by black sky
Im interested to hear about what sort of revs the turbo begins to kick in. I bought a Master Power T3/T04e 500hp rated and would like to gain an idea about how the turbo will behave on my RB20. Im aiming for 240rwkw. Does youurs do much below 4000rpm?

to be honest mate it kicks in to full boost at a little after 4500rpm can't wait till the gt30r goes in it, should make full boost at about 4000rpm believe me that's a huge difference.

The GT30r has a .63 comp that's why and a .6 turbine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...