Jump to content
SAU Community

Recommended Posts

Hey guys,

Just looking for some advice on what to start with for modifications. I have a stock r32 GTR and i am looking to purchase apexi airfilters, trust intercooler, full exhaust system and BOV's. Would these mods be a good start? Any opinions appreciated! Thanks

Link to comment
https://www.sau.com.au/forums/topic/94730-modificaton-order/
Share on other sites

firstly,

cat back exhaust (or if you have the dough go for dumps, fronts, cat and the rest)

either a K+N in the stock air box, or the apexi pods if you must

then you'll want a boost controller of some kind

Power FC is next and couple that with a set of cam gears

forget the trust FMIC on an otherwise stock GTR it's a waste of time and money. there is nothing wrong with the stock GTR cooler under 300rwkw. no real need for the bovs either as the GTR alread has nice twin bovs from the factory but if you are keen just make sure you get a GTR specific kit. I quite like the trust type R kit, or the blitz super sequential is nice too. i can't stand the HKS ones though.

firstly,

cat back exhaust (or if you have the dough go for dumps, fronts, cat and the rest)

either a K+N in the stock air box, or the apexi pods if you must

then you'll want a boost controller of some kind

Power FC is next and couple that with a set of cam gears

forget the trust FMIC on an otherwise stock GTR it's a waste of time and money. there is nothing wrong with the stock GTR cooler under 300rwkw. no real need for the bovs either as the GTR alread has nice twin bovs from the factory but if you are keen just make sure you get a GTR specific kit. I quite like the trust type R kit, or the blitz super sequential is nice too. i can't stand the HKS ones though.

Yeah i was thinking of getting the trust Type R BOV's. Okay so i think i will get my Trust power extreme 2 cat back exhaust first with a high flow cat and a trust front pipe until i get paid <_< . My front mount seems a little dirty, im not sure if its still efficient.. how much does it cost to get it flushed and cleaned?

don't waste your money on aftermarket BOV's, your standard ones work a treat.

Pod filters, you don't have to, the mines car is still using the standard airbox with a panel filter upgrade. GT-R cooler is good for 300 odd kw, as mentioned above, the just jap race car still uses the stocker.

Go for an exhaust, aftermarket ECU, an EBC and some cam gears to start off with and then go from there. Next thing after that will probably be a fuel pump, clutch, maybe injectors, cams, more boost? upgraded turbos?

Anyone?

don't waste your money on aftermarket BOV's, your standard ones work a treat.

Pod filters, you don't have to, the mines car is still using the standard airbox with a panel filter upgrade. GT-R cooler is good for 300 odd kw, as mentioned above, the just jap race car still uses the stocker.

Go for an exhaust, aftermarket ECU, an EBC and some cam gears to start off with and then go from there. Next thing after that will probably be a fuel pump, clutch, maybe injectors, cams, more boost? upgraded turbos?

Anyone?

ok thanks for that! what sort of boost is it safe to run with the stock cooler? would something like a greddy emanage piggy back computer be good enough or should I go a full replacement computer? Im only looking to mildy mod my car. like 240kw or so?

the stock bnr32 intercooler should be for around 300rwkw

however the exhaust wheels on the 16 year old turbochargers wont be.

they will let go near 1.0 bar and then youll have to fork out for a new turbo (or a pair) and thats if it doesnt do any damage when it fails, which it has known to do on the rb26. more boost means more heat simple

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...