Jump to content
SAU Community

Recommended Posts

I spoke to MAGIC performance, who offered to supply their 4' cats for $210 delivered if 10 are bought at once.

BOLT ON VERSION NOW AN OPTION FOR $260 DELIVERED(Bolt onto 3inch exhaust)

GROUP BUY CLOSED

Retail value is $300

Fitting can be done at the MAGIC performance workshop for $90, so if you get it fitted there it will cost you $290 all up.

The workshop is in Brookvale, Sydney

Im sure you all know about the cats, if not, they are the best type you can buy, with coated stainless steel mesh inside.

They are CARB compliant

problems with keeping the temp sensor fitting, read last page!

5 inch version also available, for $450 (retail is $550 for these)

Some info from MAGIC themselves about the cats:

MAGIC cat information from Nissan Silvia forum

magic.jpg

1. Me (bolt on) MIGHT AS WELL BE PAID

2. race_snooze PAID

3. mrgtsx PAID

4. mycarhasposessedme (bolt on) PAID

5. mycarhasposessedme (bolt on) PAID

6. Ryno (bolt on) PAID

7. d00dz PAID

8. Fastrotor PAID

9. FAT32 (bolt on) PAID

10. my_gtr32 (bolt on) PAID

FIRST TEN ORDERS SENT TO MAGIC 28/11/05

ORDER #2

1. bigcarl PAID

2. SydneyKid (bolt on) PAID

3. MANWHOR3 (bolt on) PAID

4. R33RWKW 5 inch cat PAID

5. Panikin PAID

6. Trooper TOO LATE SORRY

7. 26GTS (bolt on) PAID

8. nismo33 (bolt on) PAID

LAST SEVEN ORDERS SENT TO MAGIC TODAY

ITS ALL OVER JUST WAIT FOR YOU CATS NOW PICS ON PAGE 5 :P

Edited by siksII
Link to comment
https://www.sau.com.au/forums/topic/94793-magic-4-high-flow-cats/
Share on other sites

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

they have a similar design as the catco metal cats, so performance would be comparable. although you should read up and make up your own mind if you are worried.

Either way you wont find a higher flowing cat than one of this design, may it be a catco or a magic cat (stainless steel mesh inside)

Edited by siksII
I assume that this is the 3" pipe/4" body type. I need the 4" piping/5" body version.  Any chance of getting this?

Hey mate, i rung them to ask for you, and they will offer the 5' version you want for $450, the retail is $550.

I need a new cat.  Where's the thread from a while ago with a write up on these 4" magic cats?

So are you in for one?

If you follow the link in my first post which points to a thread on nissan silvia you can read all you need to know about them, straight from MAGIC performance themselves.

thanks for the link, always hard sifting through search results! that has the zoom result in it too if people want to see.

Edited by siksII
Do Magic install the cats and if I supply them a front/dump pipe will they also install that?

siksII: I dont have money untill 2weeks later Would that be ok?

im sure they could install it for you, just give them a call.

normal install is $90

about the two weeks, i will close it as soon as we get 10 people, or at the end of next week, sorry!

Edited by siksII
I might also change my dump/front pipe and get one of BATML's twin pipes. + magic cat (maybe)... still thinking...

that would be good, well maybe you could buy the magic cat now before the group buy ends, then buy the pipe later so at least u save some money on the cat.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...