Jump to content
SAU Community

Recommended Posts

Hi Guys

I had my car at MM a while ago to get the emanage ultimate installed on the r34 GTT auto but they can't get it to work.

I decide to take my car to 101 since they are suppose to be the ECU guys in Brisbane, and they tested my E-ultimate and told me that the unit is dead, because MM didn't set up the jumper correctly (setting for Nissan car) before they hook up everything and turn on the ignition.

So FYI, find out if the workshop really knows what they doing before going ahead. E-Ultimate is pretty much like the emanage blue but with 3 times the information, so its very easy to #$@% up if not careful.

D

Link to comment
https://www.sau.com.au/forums/topic/94832-emanage-ultimate-is-dead/
Share on other sites

was the unit new when u gave it to the workshop? they should replace it surely as it was their fault it is no longer working, due to bad installation

yeah, bought it from Japan brand new. I guess I will take it back to MM sometime and see what they can do. I doult they will do anything though and they charge me for the installation as well.

I've done endless installs on 34's with e-manage...did you buy the add-on to stop the check engine light from signalling when you install the ignition harness? Also did they place diodes in the igniton lead to limit the trigger voltages?

http://www.skylinesaustralia.com/forums/in...868&hl=e-manage

This show's my old e-manage blue, with a field car specific harness...the little black box is what you need to prevent errors with ignition, you can't make out the diodes on the other section.

the jumper setting alone doesn't kill the e-manages....it would take some highly suspect installation to kill one.

I've seen an e-manage appear "dead" purely from incorrect firmware.

Well, I’m not a mechanic so I wouldn't know much about it I was been told it had fried because the jumper was set to Honda Vtec instead of Nissan (don't how they can stuff that up).

The guys at 101 put the emanage blue on my car now and it works fine, so I will leave it as that for now and the E-ultimate will be setting on my desk as a nice shinny chrome souvenir for the time been perhaps give ultimate another crack bit later on down the track, when everyone is running one in their auto. ;)

I was told my E-manage blue was a dud so I sent it back to Japan under warranty and when I got it back, I was told that the software the tuner was using was too old (I actually supplied them with new software and they didn't use it!) and my E-manage needed to be updated with the latest firmware to solve my issues. Cost me $80 to fix something that I could've done myself by updating the latest firmware. All is fine with it now though.

Poor value about the E-manage Ultimate hoo@h, I remember reading about your issues with it and I was feeling the same thing after I was told my E-manage was going to be a paperweight. I don't know how they could've set the jumper for V-Tec engines either as to do this, don't you actually have to alter the jumper settings specifically for this purpose? That is, it wouldn't come set up for this from the factory would it? Have you checked the jumper settings yourself after they told you it was stuffed? It's pretty easy to do. I thought the jumper settings would only kill your E-manage if you set them incorrectly and then tried to run the car a few times. But the unit should've sent back some error messages telling them not all was good, and possibly not even started at all?

"There's very little meat in these gym mats!"

Edited by MacGuyver

yeah MacGyver is right about the firmware, this is the normal cause for the e-manage to shit itself...normally it's the ignition side that will fail to operate...it's fixable though.

hoo@h I'm willing to look at it for you if you like? Just send me the software and the e-manage and I'll see what's doing with it.

For future reference..all firmware updates can be found at www.mohdparts.com

Well, all jumper setting are listed in the user manual, perhaps they thought they had it on Nissan setting.

They did contact 101 and got the latest software, but I guess attempting to tune the car with wrong jumper setting killed it.

Anyway, I think 101 got the car running with emange blue so I am just going to leave it as that for now.

Thanks for the offer 666Dan, you wouldn't happen to be in Brisbane area are you?

This ECU can be used on R34s with Tiptronic transmission?

Can someone list the benefits of this one over say an SAFC2?  I'm currently running one and wouldn't mind looking into an upgrade.

From my minimum mechanical knowledge. :P

I had SAFCII on the 34 auto before, it was pretty good but it only works on air n fuel ratio tuning, with the emanage(latest firmware n software) u can also tune the ignition timing which will give you a bigger gain in power.

Unfortunately PowerFC don't work with the 34 auto, otherwise I would have gone that way.

Yeah I'm in Brisbane...shame the old car got stolen, could have shown you the full set-up when it was in.....it was tiptronic also.

The new one has something a bit better than e-manage now...for half the cost :(

Hey Hoo@h, you said you've gone back to E-manage blue after you couldn't get the Ultimate to work. Just out of curiosity is it possible to use the same harnesses for the E-manage blue for the E-manage Ultimate? Or do you need to buy Ultimate specific harnesses?

"There's very little meat in these gym mats!"

Hey Hoo@h, you said you've gone back to E-manage blue after you couldn't get the Ultimate to work. Just out of curiosity is it possible to use the same harnesses for the E-manage blue for the E-manage Ultimate? Or do you need to buy Ultimate specific harnesses?

"There's very little meat in these gym mats!"

Hmmm not sure. I know if you were upgrading from blue to ultimate u will need to buy additional harness, so I assume it will work perfectly going backwards, just with a few wiring left out.

I haven't actually seen it yet, only talked to the guys at 101 briefly over the phone. I am hoping to pick it up this weekend, if they can sort out the misfiring problem at high boost (one or more coilpacks need replacing I think).

Dan

I hope the guys at 101 realise that if you don't use the diodes and the igniton interface module, you get a the check engine light constantly illuminate on the R34's....it doesn't effect anything, just is annoying to see.

I hope the guys at 101 realise that if you don't use the diodes and the igniton interface module, you get a the check engine light constantly illuminate on the R34's....it doesn't effect anything, just is annoying to see.

Well, got my car back and that's exactly what I got, engine warning light is on, very annoying.

So hard is it to get the warning light back to normal, can you help me out 666dan?

btw, car made about 270 hp with emanage blue, fmic, blitz filter, exhaust and blitz i-color set at 0.9 high boost.

I hope the guys at 101 realise that if you don't use the diodes and the igniton interface module, you get a the check engine light constantly illuminate on the R34's....it doesn't effect anything, just is annoying to see.

kewl. just orded emanage ignition signal adaptor online, so is that all I need to turn those engine check light off? 666dan?

"GReddy e-manage Ignition Signal Adapter #1 - #15900906*

(For Nissan Skyline ER34 & Stagea WGNC34)

When attaching the ignition harness neo-straight 6 cars (ER34, WGNC34, etc), this adapter will prevent the check engine light from turning on.

Attach to each igniter signal on the ECU side, as well as to the ground.

Up to 6CH

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...