Jump to content
SAU Community

Recommended Posts

  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by BY BY

Benm: what mods have you got? have you run your car on another dyno?

No i havent, i want to do afew more lower-end mods first before i go to 2 or 3 other dyno's and average it out. Im running out of money tho :rolleyes:

Donnie, if you friend has a piggyback computer then obviously hes not running a standard ecu.

An R33 with an aftermarket ECU or modified factory ecu can reach 200kw

But i was saying a car with factory ecu and factory turbo will not achieve this power.

I'm not sure if i have some sort of piggyback on my ECU coz its never been proven and the previous owner didnt touch it.

And i will get 200rwkw out of my standard turbo + ecu (whatever it may be) and i'll prove it if its the last thing i ever do with my car :rolleyes:

Ben: good luck, i say again iof you have a piggy back or remap on your ecu thats an entirely different ball park. You should run your car on another dyno and check it all out.

You would be seriously pushing your car but trying to squeeze 200rwkw out of it without touching the ecu or turbo otherwise.

:rolleyes:




  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...