Jump to content
SAU Community

Recommended Posts

Hey everyone. My r32 gtst 4dr the other day started momentarily struggling on boosting, it would hesitate and make a deep whoofh air sounding noise or something for a second, then a day later it stopped creating boost all together(creates maybe 1psi instead of 10). There were no exhaust leaks arround the turbo from what i could tell and all the intercooler piping was tight. When i took the cross over pipe out though there was a bit of oil in the bottom, someone told me that was normal?. I took the turbo to a turbo shop and they said it looked fine. Any suggestions would be appreciated.

cheers

Edited by tstg23r
Link to comment
https://www.sau.com.au/forums/topic/95453-gtst-no-boost/
Share on other sites

Good idea bout the BOV.

A friend of mine had an RB20DET which stopped producing full boost and it ended up being a partly blocked CAT. The insides had melted/ broken apart and formed a fairly solid blockage. Replaced it and all was fine, could also gut it but not as legal. Could be worth pulling it off for a quick check if nothing else seems to work.

If the turbo was standard then I would say it could be a bent turbo shaft. Have seen that also and the series one turbo has a black plastic compressor wheel which made a weird siren like noise as it span up and hit the compressor housing.

Anyway, Good luck with your problem

Edited by Fry_33
Link to comment
https://www.sau.com.au/forums/topic/95453-gtst-no-boost/#findComment-1746231
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...