Jump to content
SAU Community

Recommended Posts

Hi just wondering what oil prssure you have.

New motor RB30/25, RB25 oil pump, RB25 oil feed restrictors in the block. 110psi cold with 20W-50 garbage oil for run-in. Haven't got much oil temp in it yet to see if it goes down. Does anyone else get high pressure cold? Has anyone experienced by-pass valves sticking in the pump? The pump was pulled apart and looks to be in VGC before install.

Please help. Thanks.

Link to comment
https://www.sau.com.au/forums/topic/95526-what-oil-pressure-do-you-have/
Share on other sites

On my RB25DET I get between 7.5 Bar (108 Psi) to 8.0 Bar (116 Psi) on a cold start, drops to 2 bar at idle when it's up to working temperature. So 110 Psi (7.6 Bar) is good oil pressure for a cold start :) I'm using 10W40 Motul 300V Synthetic oil.

Edited by PlasticStan

You guys made my day!!! I was just about to pull the sump off and I really wasn't looking forward to it!

The gauge is TEMPORARY for tuning- autometer pro comp liquid filled mechanical gauge (not that it makes much difference) and i bled it properly.

I might try and get some thinner oil to start with now to drop it a bit. Thanks.

2 thou bearing clearances and a 10w30 oil

If you have more oil pressure than above then there is something wrong....unless you have set it up for those pressures.

Plus if you read the manual it will tell you similar figures.

BTW...nice attempt at sarcasm but those figures are accurate. Even with an N1 oil pump you shouldn't expect any more than 80-90psi cold start.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...