What Forged Piston/rings To Use In Rb20det Rebuild

[VLRB20DET]

Ok im goin to rebuild my RB20DET cos ive started to get blow by cos of the stock rings not coping well with 190rwkw and abit of drag racing

anyway whats the best forged pistons and rings should i use ??

Ive heard people say this and that about aires, wiseco etc and total seal and N1 rings but as ive never rebuilt an engine before i dont know what i should buy

also if anyone know where they can get good forgies cheap in victoria send me a PM

[R31Nismoid]

depends on your build really, what the specs are and what you want to achieve

[blind_elk]

Talk to Bill at Australian Precision Engine Parts in Wantirna - he'll build you a nice set of forgies (with total seal rings). He may need a sample to work from, but I can provide that if you need it.

[VLRB20DET]

Im looking at 240rwkw for street/drag racing

cant afford custom made gear mate

[N I B]

Arias work well and are good value.

[The Dan]

ROSS forgies with rings and gudgeon pins and retainers for $1200.

That and Arias pistons are the only ones you'll get for an RB20

[Nathan_G1]

Tomei make a decent set of forgies for an RB20, expensive i think.........im not sure, im in the same boat as u mate, im trying to build my RB20 and make similar power, but i want cranking torque coz im building mine specifically for drift.

I'l probly grab tomei's and stroke the car out to 2.4ltr so i can get a sh*tload of torque

[N I B]

Tomei stuff is not bad value now days so look into it.

Top Racing in Perth sell Tomei.

[Jago]

or some 4AGE pistons instead of the tomei's, i think they are roughly the same size, just need a bit of modification, they are forged too. Or was it 4AGZE? can't remember, anyway, gonna need 2 engines for 6 pistons (obviously )