Jump to content
SAU Community

Recommended Posts

hi guys

my gtst is flooding so bad that it won't start. been reading the workshop manual and searching this site but can't figure it out.

What happend:I was warming it up one day and it stalled, tryed restarting it but it would just cough. Turns out it was getting way to much Fuel (not sure why), managed to push start it and blow out all da extra fuel and was all good for 10 days or so.

Then on tuesday about 3 hours after i drove it i went to start it and it flooded again. Everything is the same as when it was going that i no of.

The ecu is showing 12(air flow meter) i have tested it on another car and is fine, have also tested the wiring for the afm.

Have tested water temp sensor,fuel press and both are good.

Its cranking but wont fire, its getting so much fuel that its now pushed fuel passed the rings and is now in the sump.

the injectors sound like they are opening and closing(ckick click...).

Am lost, sez afm but it seams fine and its getting WAY to much fuel.....???

please help/ideas its driving me CRAZY!!!! :):):):)

thanks.

ps sorry bout the spelling and not sure if this is the right place for this.

Edited by 1990 GTS-t m
Link to comment
https://www.sau.com.au/forums/topic/95579-please-help-rb20det-flooding/
Share on other sites

Have you had the injectors cleaned recently. If not, then it may be caused by some gunk holding the injector partially open all the time.

If it floods, there are 2 things to do. Either crank with WOT (this allows plenty of air in to burn with the fuel) or remove the fuel pump fuse and crank until the engine "kicks", then replace the fuse.

If it floods, there are 2 things to do. Either crank with WOT (this allows plenty of air in to burn with the fuel) or remove the fuel pump fuse and crank until the engine "kicks", then replace the fuse.

What is "WOT" :D

Is the coolant temp sensor 1 of the 2 comming of the top pipe?

If so have tested both of them and compaired them with my gts and they read the same. Could it still be buggerd even if they are reading the same??

thanks :)

Edited by 1990 GTS-t m

Wide Open Throttle.

There are 2 coolant temp sensors. They are located in the pipe off the top radiator hose. The 2-pin one is for the ECU, the 1-pin one is for the gauge in the instrument cluster. You really only need to wory about the 2-pin one. If you have a GTS as well, and you know the GTS is OK, then you could swap them over and see if the problem continues.

Wide Open Throttle.

There are 2 coolant temp sensors. They are located in the pipe off the top radiator hose. The 2-pin one is for the ECU, the 1-pin one is for the gauge in the instrument cluster. You really only need to wory about the 2-pin one. If you have a GTS as well, and you know the GTS is OK, then you could swap them over and see if the problem continues.

Incorrect. The larger one is a coolant temp sensor. The smaller is a temp sender.

They are different and both have different functions.

Edited by 3lit3 32

Well its off to the shop on wenesday for some falt finding, hopefuly they can get to the bottom of this cos i sure as hell can't!!!

Thanks for all your help and keep it comming if anyone has any other ideas otherwise I'll let you no what the out come is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...