Jump to content
SAU Community

Recommended Posts

hey everyone! i just put 4 new tyres on my series II 33 2day and thought i'd wear them in a lil + i was being edged on my guys at work :) i didnt want to but i reved her up and dropped the clutch and all i got was some major clutch slippage. the car was moving forward but damn did it smell. then all the way home driving only to 3 grand, everytime i stop i could still smell the clutch. then once i got home :D it smells really burnt. how long for the smell to go away and what is the expected life-span of a standard clutch does anyone know? i have 59,xxxkms on the clock.

thanks heaps

- Ross.

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/
Share on other sites

take it easy till you can afford a new clutch. Your car may have a few more kms that 59k - most cars are wound back. Even then it could be possible that you only get 60k kms out of a clutch. You can get a Heavy duty replacement for around $350..or a nissan patrol clutch (hmm maybe not actually because yours is series 2).

Budget on about $800-$1000 installed. You may need new rear main seal etc..

If you drive sensibly I would guess about 90k kms. Im only guessing as Im new to turbos and expect them to go through them a bit quicker.

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1742643
Share on other sites

if the car still drives and it doesnt slip at high rpm it should be alrite still, just dont thrash it till you can afford to get a new clutch. when mine went its was a really hot day and i couldnt drive my car above 2000rpm it would just rev and slip.

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1743443
Share on other sites

Yeah i had that funk going on about 3 weeks before mine went... not the best feeling in the world when you first discover its on the way out. One day on the way to pick up some pizzas, driving like a granny, it totally gave up... had to struggle my way there and home, doing no more then 2500rpm :)

Is the clutch peddle really spongy? Do you have a massive take up point or whatever its called?

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1743555
Share on other sites

Just don't forget that the expected life of the clutch will drop significantly for modified cars.. The standard clutch just isn't made for too much more than standard power. Currently looking at alternatives myself as my clutch is on the way out too.

Edited by Fry_33
Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1746282
Share on other sites

i thought my clutch was slippin and carrying on. I bought a brand new clutch (button single) to replace my twin plate one.. pulled out the twin and there was a nut that came loose off one of the pressure plate fingers.. (fitted the new clutch and the carrier for the thrust bearing was wrong anyway, nice waste of an hour :angry:) fixed the twin plate and put it back in (still meat left on the plates strangely enough) and BLED THE COMPLETE CLUTCH SYSTEM! This is a really good idea if your brake fluid is soaking up alot of water (use on of those brake fluid testers to tell). I think the majority of the problem was hydraulic anyways.. *sighs* ;)

Edited by Mumbo#5
Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1746413
Share on other sites

i got my s1 r33 bout 3 months ago..the first few nights i got it, i dropped the clutch a few times, it slipped as well.

but when i gun it hard without dropping the clutch its normal.

so it seems to only happen if i drop the clutch enough to wheel spin, sometimes

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1747158
Share on other sites

Mine was shagged when I got the car. Same deal, couldn't drive over 2000rpm if it was trying to boost. Went the Cenral Coast and back to Sydney though.

I have a problem now though, my 4 month old clutch is doing the same damn thing! Is the clutch adjustable? is there any reason why it might not be clamping properly? Thanks!

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1748127
Share on other sites

Yup my clutch is gettin really bad.. slips like crazy.. cars done 78k.. s2 33, stock, apart from exhaust..

But yea i get the clutch smell as well n damm does it stink.. Cant wait till my new clutch goes in this weekend hopefully..

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-1750143
Share on other sites

  • 9 months later...
hey everyone! i just put 4 new tyres on my series II 33 2day and thought i'd wear them in a lil + i was being edged on my guys at work :D i didnt want to but i reved her up and dropped the clutch and all i got was some major clutch slippage. the car was moving forward but damn did it smell. then all the way home driving only to 3 grand, everytime i stop i could still smell the clutch. then once i got home :( it smells really burnt. how long for the smell to go away and what is the expected life-span of a standard clutch does anyone know? i have 59,xxxkms on the clock.

thanks heaps

- Ross.

Yeah i had that funk going on about 3 weeks before mine went... not the best feeling in the world when you first discover its on the way out. One day on the way to pick up some pizzas, driving like a granny, it totally gave up... had to struggle my way there and home, doing no more then 2500rpm :(

Is the clutch peddle really spongy? Do you have a massive take up point or whatever its called?

Just a cuple of days ago i wanted to run the car in a little, and see what she could do dropping the clucth (as much as i was hurting to do it - i had to try at least once) - i had major slipping 1st - 2nd and even slightly 3rd on my attempt (without properly realising). Right after, the clutch was spongy for about 30 seconds.

When my car was stationary, the smell of the clutch burning was pretty bad.... now a couple of days later, the smell seems to be fading, but is still there slightly - i think nearly gone - theres been no sponyness anymore). I've been driving the car ever since with no slippage on boost, and performaing as it was when i purchased it, with the slight smell here and there.

What should i expect from this? I'll be driving more conservatively now, until i save up for a new clucth - hope she doesn't let go :(

*note - stock car with just an cat-back exhaust - stock clutch as well i think*

First time this has happened, so im slightly worried.

Any helpful guidence would be appreciated :blink:

*forgot to mention - I also tested out the clucth going on a steep hill in 4th gear (approx 40-50km/h) full throttle and there was no slippage*

Cheers,

Steve.

Link to comment
https://www.sau.com.au/forums/topic/95769-r33-clutch-smell/#findComment-2528653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...