Jump to content
SAU Community

WTF is up with my BOV!! i have 2!!

Guest | hype^ |

By Guest | hype^ |,
in New South Wales

 Share

Recommended Posts

Guest | hype^ |

Guest | hype^ |

Posted
Posted

check this out guys!!

when i bought the car i thought it had a stock BOV on .. but today i saw a piece of metal with "blitz" on it.. under the air box

im like cool iv got sumthin thats blitz...

i take a closer look and its a F**kn bov!!!

some idiot but a blitz bov on the car under the airbox and left the stock 1 there!!

and coz the stock 1 is ferther back the blitz 1 doesnt even get to go off!! it aint loud at all..

u cant hear the bov properly when u just rev it on the spot! only a lil on changes!!

what the hell do i do??

i was thinking of swaping the blitz and stock bovs around so the blitz 1 is the 1 used first for better sound..

or maybe replace the stock 1 with the blitz and some how block the hole where the blitz 1 was off (iv got nfi how to block it!)

what do uz recon??? :P

Link to comment
https://www.sau.com.au/forums/topic/958-wtf-is-up-with-my-bov-i-have-2/
Share on other sites
PranK Grand Master

PranK

Posted
Posted

mine is right next to my intercooler, and if anyone on these boards has heard it, they will agree with me when i say it is BLOODY loud!!!!

My stock one just blocks up that piping..

see...

Guest | hype^ |

Guest | hype^ |

Posted
Posted

dam prank! nice position! - my blitz is right under the airbox :P iv got no idea why they put it there.. but it should sound better after i remove the airbox and get a filter ;)

prank.. the problem with mine was that the stock was not blocked off..

so the air was filtering through the stock 1 and didnt have a chance to get to the blitz.

i fixed it today..;)

i but a piece of metal between the piping and the stock valve..

now he air goes straight to the blitz bov!

sounds nice!!!

but i need more boost and a POD filter and exhaust ;) to make it sound louder:uh-huh: :D;)

PranK Grand Master

PranK

Posted
Posted

yeah. its VERY loud there... if i hit boost hard through any tunnels (spesh the harbour tunnel) it is seriously deafening. My whole front bar shakes when it goes off.

Yeah, i luuuurve my DTMS!! :P:D (thanks too).

JiMb0 experienced my bov at low boost last w/end. ;)

Guest | hype^ |

Guest | hype^ |

Posted
Posted

YEH PRANK!!

was i impressed or what!!!

did i hear u right in saying that it was only 2pound!??

that thing was loud as hell!!

:uh-huh:

i like the way u pulled right up next to my window with the wheel.. :lol:

and i got laughted at by prank's gf when i showed him mine,!

i cant believe its the same valve!!!:eek:

PranK Grand Master

PranK

Posted
Posted

that was Bec 2. :) I have 2 becs, my gf and my other bec (a good friend) - that was my friend Bec, not my gf.... it gets confusing.

yeah, when i lifted off it had only hit 2psi. :) or thereabouts.

GTR80Y, i need to angle the valve upward!! ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
    • Dose Pipe Sutututu
      Dumb rich kid tries modding for the first time

      By Dose Pipe Sutututu · Posted

      If you are keen, have a look at my build thread. Car is for sale for the right money or straight swap for a F80 M3 LCI.
    • Murray_Calavera
      Dumb rich kid tries modding for the first time

      By Murray_Calavera · Posted

      Welcome mate.  No point in over thinking it, buying any one of those cars you mentioned is not a smart or logical choice with the availability of many "better" (re price to performance) cars available to you.  The heart wants what the heart wants, buy whatever it leads you too.
    • Hexi
      Dumb rich kid tries modding for the first time

      By Hexi · Posted

      Hey everyone! Im so grateful to be apart of this community and ill do my best to be apart of this. Firstly, i'm not disclosing my real name due to in real life circumstances surrounding my privacy and public image (sorry lol) Secondly, The only thing personal I am willing to share is that I'm from Sydney and a descendant of one of Sydneys largest mortgage firms. I got gifted my first ever car, a 2022 Porsche Cayenne and I love it to death. Ive been driving it for about 5 or 6 months now and honestly Im so grateful for my parents for gifting me this vehicle. However recently I've been working my ass off to afford my second car (which I need help deciding soooooo community help me out please?). Once decided, im planning to try modify it myself. Recent I've been thinking about getting a Skyline, particularly a 25GT or GT-V, yes I know overrated as hell, but I'm also considering a Chaser which I recently came to love. However my dream is to one day own a 180SX (So hard to find clean versions and im not really into importing).  Lastly before I send this off, I want to apologize if I sound tacky or pretentious. I try not to and want to genuinely learn from everyone and anyone. (Im no expert in this area) Thanks for reading!
×
×
  • Create New...