Jump to content
SAU Community

WTF is up with my BOV!! i have 2!!


Recommended Posts

Guest | hype^ |

check this out guys!!

when i bought the car i thought it had a stock BOV on .. but today i saw a piece of metal with "blitz" on it.. under the air box

im like cool iv got sumthin thats blitz...

i take a closer look and its a F**kn bov!!!

some idiot but a blitz bov on the car under the airbox and left the stock 1 there!!

and coz the stock 1 is ferther back the blitz 1 doesnt even get to go off!! it aint loud at all..

u cant hear the bov properly when u just rev it on the spot! only a lil on changes!!

what the hell do i do??

i was thinking of swaping the blitz and stock bovs around so the blitz 1 is the 1 used first for better sound..

or maybe replace the stock 1 with the blitz and some how block the hole where the blitz 1 was off (iv got nfi how to block it!)

what do uz recon??? :P

Link to comment
https://www.sau.com.au/forums/topic/958-wtf-is-up-with-my-bov-i-have-2/
Share on other sites

mine is right next to my intercooler, and if anyone on these boards has heard it, they will agree with me when i say it is BLOODY loud!!!!

My stock one just blocks up that piping..

see...

Guest | hype^ |

dam prank! nice position! - my blitz is right under the airbox :P iv got no idea why they put it there.. but it should sound better after i remove the airbox and get a filter ;)

prank.. the problem with mine was that the stock was not blocked off..

so the air was filtering through the stock 1 and didnt have a chance to get to the blitz.

i fixed it today..;)

i but a piece of metal between the piping and the stock valve..

now he air goes straight to the blitz bov!

sounds nice!!!

but i need more boost and a POD filter and exhaust ;) to make it sound louder:uh-huh: :D;)

yeah. its VERY loud there... if i hit boost hard through any tunnels (spesh the harbour tunnel) it is seriously deafening. My whole front bar shakes when it goes off.

Yeah, i luuuurve my DTMS!! :P:D (thanks too).

JiMb0 experienced my bov at low boost last w/end. ;)

Guest | hype^ |

YEH PRANK!!

was i impressed or what!!!

did i hear u right in saying that it was only 2pound!??

that thing was loud as hell!!

:uh-huh:

i like the way u pulled right up next to my window with the wheel.. :lol:

and i got laughted at by prank's gf when i showed him mine,!

i cant believe its the same valve!!!:eek:

that was Bec 2. :) I have 2 becs, my gf and my other bec (a good friend) - that was my friend Bec, not my gf.... it gets confusing.

yeah, when i lifted off it had only hit 2psi. :) or thereabouts.

GTR80Y, i need to angle the valve upward!! ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...