Jump to content
SAU Community

Recommended Posts

  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

OK so a GCG hi-flow would be good for up to about 250rwkw... after a decent tune. I'm assuming that the SAFCII won't be good enough for tuning purposes?

So for all supporting mods:

1 x hi flo turbo or similiar

1 x new fuel pump

1 x adjustable fule reg

1 x new management system???

Would you guys reccomend getting new injectors or would the R34 stock injectors be good for 250rwkw?

Stan

Why wouldnt a SAFC be up to the job? For the supporting mods Im looking at using the SITC / SAFC combo, with stnd injectors, bosch pump and nismo regulator..... wanting 200awkw from non-neo Rb25.

......... why I can confidently say that Shoot Out mode doesn't ALWAYS give higher power readings. Well, not on our dyno anyway

lol I found that funny! man, what Id give to have a dyno in MY garage (at home, not work). :lol:

Brendan

Basically because SAFC will only do fuel and air control? There is no timing control option in that... hence why I said it's probably not the best option.

I'm running 200rwkw at the moment, just gathering information for the big jump :P Hopeful that I can get it all done with $5k

Thats right, so grab a Apexi SITC (super ignition timing converter), fairly rare now but I found a brand new one for $220US on ebay. Being installed right....about....NOW!

:P

Brendan

well i just got off the phone with my tuner and my car is going in on friday to get the emanage ultimate fitted. All this talk of power has made me antsy. I dont think the ultimate needs the ignition signal adapter like the older version does, but i iwll soon find out. As for the zener diodes i think that i will put them in anyways, just waitning for and email from 666DAN. NO one else has a wiring diagram for the inclusion of zenners in the ingintion wiring do they?

Am looking into it right about now :P

Anyone else know if this thing will work?

Satan,

See Stagea section, Gary's thread (SK) Apexi Super Ignition Timing Computer, he reckons its all good, and thats good enough for me by far.

Mine is going on the Stagea right now (yesterday / today), with high pressure fuel lines, nismo adjustable fuel pressure regulator, bosch 040 fuel pump, and a z32 afm.

Getting it all ready for the turbo upgrade, hopefully I dont need larger injectors........

worth a look maybe, start on ebay. :lol:

Brendan

powerplay quoted me $1600 for rom tuning. that is a fkn joke. considering it needs to be done everytime you do more mods. Emanage ultimate with all harness(even car specific harness) and greddy e01 ebc cost me $1600. If rom tuning was cheap it would be a good option, but they want ridiculous amounts to do it.

Isn't there a Daughterboard you can buy through a group buy here that allows you to modify the stock rom form your laptop......

Was quite cheap too I beleive.

Dr Drift can tune them.

I was wondering how long it wopould take for SK to see this.

Any further thoughts on my 250rwkw ceiling SK?

14psi, very conservative timing......

Id say Race Paces dyno is very very generous. 250rwkw at 14psi when its not even in the turbos effeceint range sounds a little too high. Considering you can pump another 5psi and easily get another 20-30rwkw. i went from 17-20psi and i picked up 13rwkw and at least 30rwkw in the middle with a 2535. Silva33 got 244rwkw on 14psi with a 2535 on the same dyno. Put another 5psi in that we are looking at 270rwkw, i just cant see that from a 2535. Considering i only am getting 231rwkw at 19psi from a 2535 from a dyno dynamics dyno in shootout mode. It may read low but thats all i got. Tuning for max power isnt too hard, get the A/F ratios in the high 11's and some good timing in her. Watch the knock, if its too high bring out some timing, its not too hard. Unless you are running no timing, your still going to produce some good numbers. Good tuning is in the light/middle throttle which takes alot of time and effort.

Unfortunately those dyno sheets dont show the setup of how the dyno was run. Dynos can quite easily be enhanced.

Nah, RacePace is one of the best in the country.

He doesn't play with the numbers because most of the people going there aren't worried about numbers. Just getting the best from their cars.

Ash's R31/RB25DET ran 20rwkw higher in Shootout mode on the same dyno, and it's known to be conservative.

I'm not even into the efficient range of the GCG.  14psi is quote low.

but dont forget GCG probably are rating @ a stock head style setup

non cams, and are they counting the fact itrs a NEO in thier info for you?

I had a little run with Silvas 244Rwkw (14psi) with my old 2530 setup and basically it wasnt as close as what it should have been

driver.

youve been racing yours @ the strip for a while now remember

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...