Jump to content
SAU Community

Recommended Posts

driver.

youve been racing yours @ the strip for a while now remember

Private road and rolling runs, not much any driver can't do except change one gear (2nd to 3rd). No offence, but mine felt punchier too and as expected it should running closer to 20psi against 14psi.

Edited by Robo's
  • Replies 183
  • Created
  • Last Reply

Top Posters In This Topic

i dunno, my car with 270 hauled some serious a$$... there is no doubt about that.

Bass's comes on waaay earlier than mine did and it feels pretty damn fast to me as i was in it the other day.

For a daily driver thats the turbo i would want. Mine wasnt really a daily so it didnt matter.

The GCG hi-flow from being in the car has very linear power delivery.

As reflected by the power curve, where are mine was a little laggier but by christ it hauled once it was on and i got to 3rd hehehe

The GCG being smaller doesnt need that long to get going. Im happy to say that they are of excellent quality

Not getting into a workshop/dyno battle or whatever. Its not called for, certainly not in a good thread like this. I doubt RPM is differnt to most places. The inertia settings there are different to other places etc

Many things affect it all, like how long its been since calibration and what not etc etc. long long list.

i dunno, my car with 270 hauled some serious a$$... there is no doubt about that.

Bass's comes on waaay earlier than mine did and it feels pretty damn fast to me as i was in it the other day.

For a daily driver thats the turbo i would want. Mine wasnt really a daily so it didnt matter.

The GCG hi-flow from being in the car has very linear power delivery.

As reflected by the power curve, where are mine was a little laggier but by christ it hauled once it was on and i got to 3rd hehehe

The GCG being smaller doesnt need that long to get going. Im happy to say that they are of excellent quality

Not getting into a workshop/dyno battle or whatever. Its not called for, certainly not in a good thread like this. I doubt RPM is differnt to most places. The inertia settings there are different to other places etc

Many things affect it all, like how long its been since calibration and what not etc etc. long long list.

Im sure it is quick, so your saying boosting Bass's car up, is not going to achieve much. Coz 250rwkw at 14psi is certainly high and thats why i had to feel silvas 244rwkw coz i didnt really beleive it at that psi.

I know dynos get regularly serviced but my mate has one and i was spewing when he told me that my old readings where 20 rwkw high as the barometric pressure were reading incorrect. And he showed me how air intakes readings can increase readings as well. So now, i tend to look at the data on the bottom of dyno graphs.

250rwkw at 14psi when its not even in the turbos effeceint range sounds a little too high.

I'd say the turbo at 14psi would be smack in the middle of its efficiency..

Going by the fact that some others with this same turbo *r34/vg30 turbine housing* have made 270rwkw.

The R34/VG30 turbine is a .7 something, as a result less back pressure, less reversion and higher VE.

The GT28 & 30 are in the meat of their efficiency at around 1bar according to the compressor maps in the garrett catalogue. Its not directly comparable as the GCG unit does run a smaller comp cover.

Any one know what comp wheel the GCG highflow uses? GT28 or GT30?

It would be interestering to see the boost a Non-Neo RB25DET with stock cams would need to make the same power as Bass.

Edited by Cubes
Im sure it is quick, so your saying boosting Bass's car up, is not going to achieve much.  Coz 250rwkw at 14psi is certainly high and thats why i had to feel silvas 244rwkw coz i didnt really beleive it at that psi.

well he simply cant due to the pinging issues he has/comp related to the NEO.

As cubes said, if its right on the song then thats where it is.

Anyone got a comp map of the GCG to have a bit of a look-see?

Does one exist?

If not then its like all other hi-flows, basically a gamble that no-one knows what or how its going to perform on any given spec'd motor

If maybe he dropped it via a nice big gasket it would be interesting to see what it can do, if anything. Only one way to find out really isnt there?

Over to your H/G hunting Poiter :P even though i know you aint getting one lol.

There isn't a map available I'm told by GCG. Also I'm pretty sure it's the GT30 core but I can't remember how I know that.

As we all know there are heaps of variables in engines. Dropping the compression in Bass' car might only net him the same power at more boost.

For every 0.5 drop in compression ratio you need roughly 0.2 bar increase in boost to achieve the same power.

This is why I was never going to go down to 8.2 as someone recommended because I would have needed to push about 1.25 bar just to keep the same power I had at 0.85 bar previously.

I was told by ATS (who forward customer on to the GCG hiflow option, so theyve got nothing to gain by making up dodgy info) that the cores are GT30 and ground down to suit the specific application....... as best as my memory serves me.

Hope that helps.

Brendan

Mine gathers dust.

Mine gathers dust faster than yours.... but my dust-dyno has different settings so i dunno now! :P

I clicked on this thread expecting to read about your rebuild... 1 post for the rebuild, 4 pages for off-topic convo haha, still a good read :)

It is about my rebuild but it was also supposed to be a repository for NEO info which it has turned out to be.

Shonen - you're obsessed with highmount. I'm more likely to put nos on it than a highmount. That said, a 2835ProS would be nice but I can't afford anything atm.

I've already got the highflow so I'm sticking with that due to $$. I've got some cams going in though so that should make some difference.

I think the 4 doors have the viscous LSD and the 2 doors get the helical LSD which means I'll be up for a new diff at some stage.

I think the 4 doors have the viscous LSD and the 2 doors get the helical LSD which means I'll be up for a new diff at some stage.

Grab a r32 gtr mech clutch center and half shafts (5bolt). You can also fiddle with the ratios if you wish. 3.7, 3.9, 4.083, 4.11, 4.363 are available.

I've seen the gtr centers go from 450-650.

Im going a 3.9:1 out of the auto s13/s14/s15's, should work a little nicer with the 3ltr.

Or there's 1k for a decent 1/1.5/2 way that clunks a little around corners. :P

Edited by Cubes
mph does if the timing is up the creek  :P

i ran 12.1 @ 113 or something still sliding @ 1/2 track. go figure  heheh

Well thats showing you actually got some pretty good traction and not much top end, similiar to a GTR time

thing is i didnt lol. EVeryone found it quite amusing how little i had :unsure:

My car was all top end, had nothing remotely interesting until 4300rpm :)

It was slideways off the line, then skating for approx 1/2 track where it settled, 2.1 60ft...

Timing was so out that day, damn heathcote

Abobob, just wait till you kill the diff.

You never know. It could hold out for a while. If your nice to it there is no reason why it shouldnt really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...