Jump to content
SAU Community

Recommended Posts

Had my line for 1 1\2 yrs now and learnt some hard lessons along the way.

First DONT drive over drive gutters fast! If your stuck go at a huge angle or back out, you drive in and its fine but try to get out! Your front bar will love you.

If you have no ABS expect to lunch front tyres as some idiot pulls out in front (twice), these are a cast iron block, I now run a harder compound which seem to handles it better.

Drift is quite tricky with the Hicas trying to correct you, allthough the harder compound makes it easier.

If you change anything on the standard set up, alot more needs to be done than just the one thing.

Link to comment
https://www.sau.com.au/forums/topic/95940-all-new-skyline-owners/
Share on other sites

Hey this could be a really good thread if everyone chips in a bit on what they've done and shouldnt have.

Here's mine. If you've got vents in your bonnet so you cover up your air filter with, say, a plastic bag to stop water in the intake when you wash the car, REMEMBER TO TAKE THE BAG OFF BEFORE YOU DRIVE IT!!!! Ive only had my skyline two weeks and i already stuffed up.

Need a new air filter now... laugh it up

Edited by Freeman

Cheek up on wat mods you want on this form chanses are 1 of us has been there and done that + we should have a thread about the good products we have brought and make it a sticky

+ dont lend it to your misses and let her drive with high heels she will put the heel through your car carpet

When shopping for fully sick jap wheels with heaps of dish, make sure u take into consideration not only offset but brake disk clearance! Just because the wheels have the correct offset and look good doesn't mean they'll fit properly. I learnt the hard way.

dont accelerate around corners in the wet, unless you dont like your neighbours front brock fence.

LOL DID THAT after i got my line for 2 month!! smashed into "Welcome to Strathfield" sign !!!!! and cops drove pass....gave me a hard time and a fine!!!! they didn't even see the accident!!! OMG

SO DON'T REV TOO HARD IN RAINING DAYZ ON 2ND GEAR!!!!

Had my line for 1 1\2 yrs now and learnt some hard lessons along the way.

First DONT drive over drive gutters fast! If your stuck go at a huge angle or back out, you drive in and its fine but try to get out! Your front bar will love you.

If you have no ABS expect to lunch front tyres as some idiot pulls out in front (twice), these are a cast iron block, I now run a harder compound which seem to handles it better.

Drift is quite tricky with the Hicas trying to correct you, allthough the harder compound makes it easier.

If you change anything on the standard set up, alot more needs to be done than just the one thing.

Oh bro, thanks for the tips man.

So, i shouldn't dive into driveways @ 40 kmh.

I should watch out for idiots pulling in front of me, coz my cast iron block ruins my tyres. Must get harder compound tyres.

I shouldn't attempt to drift with the Hicas enabled. Can i put a switch to it bro, so i can turn it off when i wanna drift. Again, must get harder compound tyres.

I shouldn't change anything on the standart setup or be prepeared to change more than one thing.

Thanks again bro, your words of wisdom really helps. This should be a sticky.

OH also, i must not accelerate around corners in wet.

lol.

yeah gutters are bitches. gutter rash is not yout freind.

corners in the wet is fun if you know how not to end up in fences or poles.

hicas and drift.... disable hicas if you want the car specifically for drifting. otherwise dont worry about it.

and most of the other stuff is common sense. :angry:

and most of the other stuff is common sense. :angry:

Common sense ??? WTF does that mean...? Are you calling all his senses common..?

I would like to add some valuable input to this thread as well :

If it's raining, do not go outside unless you are prepeared to get wet.

If you are running low on fuel, go and fill up. In a most likely event, you will run out of fuel.

If you just had a shower, put clean undies on. Dirty ones must be washed.

Whatch out (is this a new term for clocking off ?)for some cars that like to rev alot and break into lots of wheelspin too. (EDIT: Damn it someone else mentioned ity already)

Don't drive with your high heels on unless you are from Perth. :)

Hope these help.

if you get a stagea, be prepared to get called a volvo driver. then get blank looks when you tell them its a stagea. then watch the jaws drop as you pop the hood, showing them WHY your volvo smashes the idiots fully SIC SS commondore.

oh and finding ANYthing for your car bodywise is a bastard. operator? get me japan!

no. i mean......

this whole thread is really just common sense. like anyone could tell you that not taking gutters sideways in a low car will f**k your front bar good, or giving it a heap of shit in the wet will cause it to go sideways.

if you dont know stuff like that..... you proly shouldnt be driving a skyline.

no. i mean......

this whole thread is really just common sense. like anyone could tell you that not taking gutters sideways in a low car will f**k your front bar good, or giving it a heap of shit in the wet will cause it to go sideways.

if you dont know stuff like that..... you proly shouldnt be driving a skyline.

Just piss off with your common sense bullshite dude...

If you don't have anything valuable to contribute, than don't at all.:(

Here are my other pointers that i learnt the hard way :

If it's too dark to see, turn your headlights on.

You teach a child to read, and he or her will be able to pass a literacy test.

A verbal contract isn't worth the paper it's written on.

Man piss in wind, wind piss back.

He who sleep with itchy asshole, he will wake with smelly finger.

Fool me once, shame on... shame on you. Fool me... you can't get fooled again !!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...