Jump to content
SAU Community

Recommended Posts

Boof Heads.

How about you all jump in and race in a class, any class, JUST PICK ONE and support this sport by filling fields and racing instead of whinging that the Sport Compact classes are to difficult to race in for your particular ride.

There's a class for just about everyone that falls even vaguely under the S.Compact banner. Get over your petty grievances until you can actually say that you are supporting the future of this sport.

Adrian

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Dude you're a goose, there are a few ways to look at that ruling. One is that the cars are meant to be "street" cars, and should be running stock gearboxes. Another is by restricting the transmissions allowed will encourage cheaper parts.

The reality is that the only OEM parts used by the majority of the qualifying field is the outside case. So a $10,000 PPG box is "worse" than a $4,000 Powerglide? From a breakage point of view too the Powerglide will be cheaper to run and maintain than a dog box. How is that a realistic rule?

They way I look at is from a performance perspective, not a cost one. I don't think you can write rules that stop people spending money, they will spend whatever they can afford.

The rule writers are obviously of the opinion that the ability to change to a non OEM gearbox is a performance increaser, that's why they handed out a handicap for doing it. My view is that an high stall speed drag auto is worth more than 150lbs in performance, I chose 200lbs based on the weight/performance index.

I am simply saying that 150 lbs is not enough and that 200 lbs is a more accurate reflection, I don't think you should be attacking me on the basis that they don't need a handicap at all. That is already decided and agreed and included in the current regs. If you want to argue cost (which I think is a valid argument by the way) then you need to do just that.

I should emphasise that I am not asking to run a LIGHTWEIGHT R32GTST, all I am asking is to run a STANDARD WEIGHT R32GTST . So I don't think is is either fair or accurate to tell someone with a standard R32GTST to go and race in another class. Because that's what the current regs say.

:P cheers :)

Edited by Sydneykid
I should emphasise that I am not asking to run a LIGHTWEIGHT R32GTST, all I am asking is to run a STANDARD WEIGHT R32GTST .  So I don't think is is either fair or accurate to tell someone with a standard R32GTST to go and race in another class.  Because that's what the current regs say.

:P cheers :)

Sorry Gary but you say your R32 weighs 1180 kgs with roll cage +driver weight but the stock specs for a standard R32 seem to be 1320kg with no cage +driverhttp://imports.motortraders.net/imports/spec.asp?id=668 but you've only made minimal weight reductions and added weight by adding a cage hahaha

So really a STANDARD WEIGHT R32GTST will have no problems at all racing in SRWD class

Sorry Gary but you say your R32 weighs 1180 kgs with roll cage +driver weight but the stock specs for a standard R32 seem to be 1320kg with no cage +driverhttp://imports.motortraders.net/imports/spec.asp?id=668 but you've only made minimal weight reductions and added weight by adding a cage hahaha

So really a STANDARD WEIGHT R32GTST will have no problems at all racing in SRWD class

I have no idea where they get 1320kgs from, but it isn't correct.

I have the Japan exit weight for mine and it was 1265 kgs, that's a standard 1990 model R32GTST M Spec 2 door with aircon. It had no ABS or sunroof and a little fuel in the tank (not much).

This is an extract by funkymonkey on R32 specs

http://www.skylinesaustralia.com/forums/in...9&hl=definitive

As you can see it quotes 1260 kgs, so mine is no super lightweight. Add an 85 kg driver and you are at 1345 kgs, that means 64 kgs of lead to be added to a stock standard R32GTST.

:) cheers :unsure:

Boof Heads.

How about you all jump in and race in a class, any class, JUST PICK ONE and support this sport by filling fields and racing instead of whinging that the Sport Compact classes are to difficult to race in for your particular ride.

There's a class for just about everyone that falls even vaguely under the S.Compact banner.  Get over your petty grievances until you can actually say that you are supporting the future of this sport.

Adrian

WORD

sport rwd had 98 entires at qld jambo about triple that of sport mod.

exactly the top guys in sport rwd should be advancing into sport mod.

especially when most of those cars fit sports mod rules a whole lot better then sport-rwd....

mick

they have to run slicks to be in sport mod, you cant run street tyres in sport mod.

i dont think the top cars want to run against kier wilson or the 7 sec rx3 from PAC.

exactly the top guys in sport rwd should be advancing into sport mod.

especially when most of those cars fit sports mod rules a whole lot better then sport-rwd....

mick

they have to run slicks to be in sport mod, you cant run street tyres in sport mod.

i dont think the top cars want to run against kier wilson or the 7 sec rx3 from PAC.

Its DYO so i don't know where the fear comes into it...i think the word thrill comes to mind more than fear.....Anyway....who is Kier Wilson ?

yeah isnt it a stock rb26 doing 8s?

lol

that'll show those 'stock' 2js

ahh yes....i do remember reading about that car in a mag.....an engineering marvel

why?

what motors would you like to include?

remembering we are sports compact. its not about big engine displacement?

mick

VQ45 Nissan engine is what he wants included.

Does anybody have a rule change suggestion that doesn't directly influence their race car??

Ahh yes there is one person....see second post.

VQ45 isn't eligible right now - due to the maximum 4.1L displacement rule. Any thoughts on the maximum discplacement rule?

V8's are not currently eligible to run in Sport Compact either. I am open to arguments for and against though. I am yet to be convinced one way or the other as to whether hi-tech, late model injected OHC bent eights should be allowed to run or not.

Adrian

VQ45 isn't eligible right now - due to the maximum 4.1L displacement rule.  Any thoughts on the maximum discplacement rule?

I think it should be the same as the NHRA Sport Compact at 3.5 litres maximum limit.

it will always be dyo,

dyo is harder racing than head up any way, you have to think about it way more.

DYO is all about preventing racing becoming too expensive for most to compete.

DYO can have it's own moments of excitement, but there's something intrinsically wrong with sandbagging, buttoning off and braking during a drag race.

I think it's a good concept but it can have awkward moments, especially during the infancy of Sport Compact where field sizes are so low. You can get really embarassing ETs for class winners which does not provide excitement for the spectators.

In my experience 99% of spectators do not understand DYO or the handicap starts. If they were better educated they might understand some of the excitement as the quicker car tries to hunt down his competitor and all the drama about should I or shouldn't I at the top end.

Even fewer understand index classes, but then there are none in Sport Compact at the moment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...