Jump to content
SAU Community

Recommended Posts

trying to find 2xstock turbo's from r32 gts-t (rb20) or even stock SR20 turbo im located in eastern suburbs but doesnt matter to much on location

thanks

Hows it going mate? I have an RB20det turbo for sale (t03). It was working fine when taken off the motor about a year ago. Has been sitting in my garage ever since. Has no up and down movement and very little in out. I am putting a RB25 turbo on my engine this weekend and the one I have on my motor at the moment will be for sale also. Blows no smoke and next to no in out movement and no up down. Both turbos have not been boosted above 12psi. Asking $600 for the pair. if your keen, let me know. I am on Brisbane's southside.

Regards

Steve 0411 206 780

i have a stock turbo off my skyline

reason for selling is i fought my turbo seals were gone coz my car occasionally would blow a cloud of blue smoke so i changed the turbo and it was still doing it. I found the problem to be a faulty PCV valve.

Im asking 200 for it and im in melbourne(broadmeadows)

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...