Jump to content
SAU Community

Recommended Posts

guys what is the main diff between the 2 turbos below:

HKS - GT Sports Turbine Kit - 2835

HKS - Turbo Kit - GT-RS -

now why i ask is apprantly there both rated at 400ps.

so yeah me confused.

anyhelp would be good ;)

thanks in advance

Actually both use the Garrett 71mm GT35 BCI 18 series compressors in 52 trim though optional on 2835's 48 and 56 trims .

Main difference is the turbine , GT-RS is the fancy name for a Garrett GT2871R with the middle or 52 trim compressor . All 3 2871 cartridges use the 53.8mm GT28 turbine in 76 trim (NS111 type) . Also avail in 48 and 56 trims .

HKS GT2835 and some Garrett GT3071R's (WG type) same cartridges use a 56.6mm cropped GT30 UHP turbine .

The theory is larger turbine makes for better "balance" of compressor to turbine size ratio .

Make careful note that HKS generally stick to smaller trim compressors than Garrett do - the result is better response or lower boost threshold if you like .

As for the 400PS , the GT-RS would be on its knees from a turbine inlet (back) pressure point of view .

PM me if you want all the numbers n bits n pieces .

Cheers A .

GTRS's on gtr's are capable of much more than 300awkw. how ever were talking about just a single turbo kit.. the disco potato is a GT28rs rated between 320 and 350 from memory and they are a excellant turbo for a sr20 for response

from memory there was someone of the forum makeing 270rwkw in a 33 gtst with a hks gtrs and suitable mods to go with it

Wazz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...