Jump to content
SAU Community

Recommended Posts

Hey guys,

I went to Hitman Ignition Tuning today to tune my SAFC-2. I drove in with 147rwkw and drove out with 191.6rwkw. You do the math (i suck).

The service was A1 and he even fixed a few problems i had with the car (timing, spark plug gaps).

Here is the dyno graph:

dyno01.jpg

My car is an AUTO r33 gtst, fmic, 3" turbo back and a pod.

and heres a few pics i took.

dyno03.jpg

DSC00697.jpg

Matt was very willing to explain every step during the tune which is why i felt i had to post this. He's definately a top grade dyno tuner.

Here is his web site if you guys want to contact him.

Hitman Ignition Tuning

w00000t

Edited by SECUR1TY
  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

50rwkws with just the safc

that sounds like bs to me

( not being rude champ)

wat also was done ehaust and pod

50rwkws is f*&%en heaps man u wont get that much from any mod apart from engine and a big turbo

james

with the exhaust, fmic and pod i was running 147kw because it was running mega rich.

its not bs.

maybe you should know what you're talking about before you post bs comments.

(not being rude champ)

I have an auto and have been modding 4 3 years and 50 rwkw IS BS

compleat BS

Not being rude ether

mine r33 auto

3' ful exhaust

fmic with plumb back

pod

ebc

255rwhp @ 10 psi

so your thread interests me and i have been doing this to my auto for a while so when we (auto boys) pull big power i am interested

i had an safc 2 fitted and got 10rwkws

could have been my tuner but the guy is knowen 4 pulling huge hp (and blows turbos all the time)

so that is y i am amazzed, your car must have been running like a pig

also can you flat foot it without poping

i found a few extra kws and a good power band

sorry about insult did not mean anything but you might get more liners a bit ify with that massive gain

james

Security ok champ wat next in the mod angle

i am going the emanage i think but you might have changed my mind

shift kit

fuel system

i recon your turbo is hiflowed is it standard wat psi is it at

and can you put your foot flat to the ground without poping

sorry about all the qs but i realy am interested not enough auto boys

and wat do you want out of it

james

yeah man.. Hitman definately knows his shit.

he uses Haltech engine management but i'd probably go with pfc when i do a manual conversion.

nah my turbo is stock but next mod in line is a t3/4 hybrid (internal gate). maybe get into the 220-240kw range. i'd probably go for the emanage too if i havent gotten the manual conversion by then.

im running 10psi but it spikes up to 12psi mid range for some reason.

basically im looking for a weekday work horse/street racer/weekend worrior(drags)

could have been my tuner but the guy is knowen 4 pulling huge hp (and blows turbos all the time)

WOW! if he is known for blowing turbos he must be really good. i've always thought that being able to damage peoples cars is a sign of a really good tuner... what's his name? my daihatsu needs a quick tune up.

This is an interesting thread

Security: Lets not mislead people into thinking that 50rwkw gains are achievable through the use of an S-AFC, especially on a car like yours that is virtually stock because they arent - end of story.

The ONLY way that you could find that much more power is if your car was running like absolute shite beforehand. The gain is not soley attritbuted to your S-AFC.

It could also be argued that that power figure looks a tad optimistic for an automatic RB25DET with the mods you have listed.

This is an interesting thread

Security: Lets not mislead people into thinking that 50rwkw gains are achievable through the use of an S-AFC, especially on a car like yours that is virtually stock because they arent - end of story.

The ONLY way that you could find that much more power is if your car was running like absolute shite beforehand. The gain is not soley attritbuted to your S-AFC.

It could also be argued that that power figure looks a tad optimistic for an automatic RB25DET with the mods you have listed.

How could you say that Nick , the guy has it all in writing 191.6 kw, ah and he has a big polished fron mount too ....at 102 kmh , that indicates 2nd gear ..... How can you compare power of that car to a manual in 4th gear ... you cant , its just a figure thats all .

Links you are on the money mate 2nd gear with the aid of the torque converter ....

So what are you saying Jerry? Im stating that in order to suddenly realise a gain in power such as this, the car must have been running pretty badly before and Hitman has no doubt corrected various issues to regain lost power, as well as tuning the S-AFC.

Perhaps we can see a dyno reading of how the car was running before the cleanup and tune?

We wouldnt want people to think that an S-AFC with a tune can instantly get you 50rwkw - Thats my point.

My only question is, the "before-tune" figure was under 150rwkw, 147rwkw I think. Would this be a little low considering that the mods were already there?

Maybe something to do with the dyno to generate a lower initial figure? Not 100% sure. When I first dynoed my car in "almost" stock form, it came up with 159rwkw... so it seems a little low. The current setup is getting me 194.6rwkw - maybe his final figure isn't the question, but the intial figure?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...