Jump to content
SAU Community

Recommended Posts

No, i never made any accusations, nor said that you fabricated your dyno reading.

My post was a tounge in cheek response to your "well the paper says it so it must be right comment" - The dyno sheet I posted shows that thats not always the case :D

All in good fun mate

  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

Hey Gengis,

Please post your results somewhere as I'm getting my DFA tuned on wednesday. Then PM me or something so I can find your post... :)

Got these mods, turbo back 3", big cooler, pod. Chews 18l per 100km. ;)

Hey Gengis,

Please post your results somewhere as I'm  getting my DFA tuned on wednesday.  Then PM me or something so I can find your post...  :)

Got these mods, turbo back 3", big cooler,  pod.  Chews 18l per 100km. ;)

Cool another DFA user :P Will do Chrisso, I'd like to know your results too

ill be going down to WSID on the 14th of december if the weathers any good.

ill post it up in the events section.

i bet those chromies will slow u down............. and blind the spectators ....

i think u only got a 50rwkw gain coz ur car was running like shit b4 :)

exhaust, fmic, ebc for me = 185rwkw

then with powerfc i got 201.. so i think 191 is a little high .... but maybe a safc could give him 6rwkw on top of the standard mods?

autos must dyno high 4 some reason sercuritys dyno was close to mine aswell

there are ather autos that hav pulled good power aswell

must be something in the dyno

but a 191 manual will kill a 191 auto cause you can rev to to shit

shift kits and histalling will help

i think we all hav put too much emfisis on the safc and not the service or tune hitman did and if sercuity is happy that is the main thing getting ripped off is shit

james

my car was definately running shit.

but the point is Hitman fixed it all up.

the chromies are off.. ive been driving around for around a month with stockies on the back and chromies on the front.

anyone want to buy a set of 19s? :)

Guys Security is right...Hitman adjusted his timing and spark plugs aswell as tuning the safc....

By adjusting my timing on my r32 auto stocka..it went form 111.3rwkw to 129.9rwkw my timing was out..but what a difference it made.

And Hitman is awesum...he only tunes cars and so I believe for 15years.

He tuned my dad's r32 and got an extra 40rwkw or so by tuning alone???His r32 is highly modified though..

This is why i have a certain dislike of dyno's.

Secur1ty - Your final graph looks good, but the first one thats been done looks a bit bs - Were you honestly running 12/13 psi of boost? It almost seems as if the tuner did not have the throttle at 100% - seen by the drop in revs/power up top (the squiggle)

Something seems seriously amiss there. The run was also done in 2nd - that definitely will affect things.

I will be there on wednesday at wsid on the 14th. If you want, we can run side by side. I can give you a 3 second head start :P

What we really need to do is to get all these cars and a dyno day together so we can really truly gauge who is relatively making what power.

What we really need to do is to get all these cars and a dyno day together so we can really truly gauge who is relatively making what power.

Yes I'm all for this. Right now there seems to be a fair number of NSW people with new or updated dyno results.

This is why i have a certain dislike of dyno's.

Secur1ty - Your final graph looks good, but the first one thats been done looks a bit bs - Were you honestly running 12/13 psi of boost? It almost seems as if the tuner did not have the throttle at 100% - seen by the drop in revs/power up top (the squiggle)

Something seems seriously amiss there. The run was also done in 2nd - that definitely will affect things.

I will be there on wednesday at wsid on the 14th. If you want, we can run side by side. I can give you a 3 second head start :P

What we really need to do is to get all these cars and a dyno day together so we can really truly gauge who is relatively making what power.

If you pop a car on the dyno, and severely retard it's base timing, you'll see a lovely squiggly line. Mine did it too.

Yes, we need another UAS Skylines Australia DYNO day!!! Bring it on I say, my car was stock last time I ran, even won the Zoom magazine encouragement award, and look what it did to me, my car....and my wallet.

lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...