Jump to content
SAU Community

Recommended Posts

I own a R33 and unfortuantly i can tell you that all my bass is trapped in the F#$%in boot.

There is a 12inch sub in there i swear. Its just the metal plate that separates the boot and the back seats blocks my bass.

It used to sound good in my previous car. 8-(

Anyone got ideas on removing it or cutting holes in it to free the bass...

Thanks. :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/
Share on other sites

if your sub box is ported then it won't sound as good as a sealed enclosure in your car.

at the moment i have an old pioneer 10" free-air in a sealed box (i know, i know, it's not designed for a box...) and it actually sounds a lot better than i thought it would.

which way is the sub facing? try facing it into the rear corners of the boot.

also make sure your boot is sealed properly.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-150456
Share on other sites

Hmm, I suspect a better sub/subs and amp would make a huge difference.

I have 2xSoundstream Rubicon 300W with 1x600w earthquake amp.

There in the boot of the crx, which is in no way connected to the insided of the car.

More bass than you can poke a stick at....

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-152047
Share on other sites

you wouldn't want to that plate contributes to some of the structural stability of your car.

besides... bass should pass thru the metal plate with relative ease as its not a dampening material.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-153459
Share on other sites

My mate just put a sub in his and found that removing the factory false wall that hides battery, it mabe a very noticable difference. He is fabricating a new cover.

Me personally i beleive in speed. SKYLINES are performance cars not BOOM boxes. And before you ask, I have decked out my company van (owned by the company i work for, but in my care 24/7) with a decents audio system, including a 12 inch Rockford Fosgate sub powered by a PUNCH series R.F. amp.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-153680
Share on other sites

No need to upgrade my system. Its the pump.

It's just it sounded better in my Hot Hatch than it does in my GTS, I guess thats to be expected though.

Ive spent over 4k on it and its all Alpine with a 12" Kiker and 2 x Big Kenwood Amps so i dont think upgrading is the problem.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-155183
Share on other sites

Originally posted by GTS-4-Freak

No need to upgrade my system. Its the pump.  

It's just it sounded better in my Hot Hatch than it does in my GTS, I guess thats to be expected though.

Ive spent over 4k on it and its all Alpine with a 12" Kiker and 2 x Big Kenwood Amps so i dont think upgrading is the problem.

Ah ok.

Still, with that type of set up, it baffles me how you can ask where the bass is...:lol:

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-155293
Share on other sites

It's got me farked where your bass has gone. I have a Fusion fpw-1500 15" run by a Rockford Fosgate 250m2 monoblock amp, also in an R33. There sure as hell isn't any problems with bass with that, and it's in a ported box.

The Tool

Dunno what you mean by "a ported box won't sound as good in your car". Mine sounds fine, heaps better than my old sealed box, and is absolutely cranks with the low notes.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-157646
Share on other sites

I put my old amp and sub into my 32 and was pleasently surprised at how well the sound travels through the metal sheet behind the chair. Not quite as good as my 180sx though but the equipment has aged and had a hard life since then so it may not all be the car. No way I would go to the effort of cutting out holes when it sounds perfectly fine facing the back of the car. Cutting holes or removing it alltogether is also illegal too as you are removing too much structural integrety of the car.

Link to comment
https://www.sau.com.au/forums/topic/9702-wheres-the-bass/#findComment-163861
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...