Jump to content
SAU Community

Recommended Posts

I have a Kicker 12" sub in a sealed box run off the small Coustic 4ch amp.

I had the same system in my last car (a 2001 Astra) and yes I got more bass. In the Astra I had the sub facing into the car with the box all the way to the front of the boot (next to rear bumper). If I wanted more bass all I had to do was fold down the ski hatch! :lol:

With my Skyline I have it facing out up against the false wall. I would say the bass now is better than I had in the Astra. Mainly 'cause I have spent a heap more time adjusting settings!

Have you thought about putting some extra holes in ya parcel shelf and then covering with speaker grill? Might let a bit more sound through. I wouldn't remove the metal plate though!

If I cut a 230mm hole in the centre of the metal plate and sandwich the plate between the sub and the box (see post #18) using 6mm screws and T nuts the car's structural integrity won't be comprimised at all. Legal? Well..... N.S.W. blueslip inspector said he wouldn't have a problem with it but if I wanted to be 100% sure I could get it engineered.

R33's have hardcore sound dampening particulary in the boot. The VL was probably one of the worst examples of sound dampening. You just need a good setup to focus the sound in the car rather than trying to push it out the car and to everyone else around the car :)

the bass is always louder in a hatch.

its because of the loading and the boot size.

you'll never get the setup to sound as loud as the hatch. youll probably have to give it twice the power to catch up :)

but still, try and face it in a different direction to get some more out of it, you might get an improvement

If you look at the cabin of a skyline as a compartment of a certain volume, how is it fundamentally different to the cabin of a hatch of similar volume? Apart from the limited loading options of course. Wouldn't aiming a sub through the armrest of a skyline (sealed through the metal plate) perform similar to a forward facing sub at back of a mid-sized hatch?

the reason subs always sound better in a hatch is the dynamics of the interior, eg sloped rear window from which the bass rebounds straight off into into your back, whereas in sedan it will try to bounce either off the boot and through the seat into the cabin or, just try to get through the seat and into the cabin depending on which way you have it facing. so basically; with the gear that you have it will never sound as good as what it did in your hatch. you will have to change gear if you want more bass or just add another sub.

as for ported or sealed; 15" subs work very well in aported enclsure usually for the fact that that is what they are most commonly designed for, loud low chest turning head ringing bass!!! the fact that they are ported allows the sub to hit much lower notes, but it wont hit you as hard as a sealed enclosure. so when using a 10 or 12 inch sub they cant go quite as low a s a 15" so we generally seal them so that they will at least hit you hard :D

  • 9 months later...

Which way are you subs facing? I have two 12" aplines facing outwards, towards the ass end of the car and the bass is INSANE. Trying facing them away form the back seats instead of at them.

See how that goes :P

I have placed a 12mm mdf board flush with the panel you are speaking of removing(in front of battery) on which my amps and wiring are mounted.. i bet it would be heaps louder without it!

I didnt even think of that when i installed it :D

hmmm..

It can vary I think depending on sub/box/etc (mine is sealed) 12". At first I pointed my sub back as many suggested, and it didn't sound so hot, then i pointed it forward and it sounded nice and loud but it gave a very annoying harmonic buzz in the the parcel shelf (one day i'll build a parcel shelf/sound deaden, etc, but not now)..

Then i moved it to the rear, facing at about a 40degree angle. The buzz is gone and still nice volume. So that for me and my setup seems to be the best for me.

I see you're in NSW.

Before you do anything at all please bring it to us so I can diagnose it for you. We usually insert small 10's under the shelf next to the battery and that gives people plenty of bass so I'm assuming there is something going pear-shaped with your sub and / or amp. :D

  • 1 month later...

Im just curious as to how the metal insert in the back seat/wall is a 'structual' item? i have removed mine completely and fitted two 10inch mtx subs in a free air setup. The metal plate is light bendable and flimsy. And simply just bolts on, not under pressure from exerting forces etc? This seems rather interesting to me.

dont forget the size differents in the car also....maybe a new box......i had a 10" in an excel which the box was designed to firesideways :s put that in the skyline and you get nuttin at all

depends on the way you have it setup and what is was really desgined for.........dont cut the wall out bad idea just get it tuned and a new box :O

youll be sweet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...