Jump to content
SAU Community

Recommended Posts

can u make a r32 gtr skyline 100% rear wheel drive but still have 4wd at a flick of a botton i no u can pull a fuse or somthin out and make it like 80% rear wheel but just wanna no if this can be done and for how much u think and would u be able to still have it as a every day driver

Edited by overboost
Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/
Share on other sites

Send a PM to 'Duncan' and see if he has more ATTESSA controllers for sale.

And if you're after help, cut the sms talk dude. There is no saving in typing 'no' instead of 'know'. It just makes it hard to read and pisses people off. Also try breaking your post up into bite size chunks commonly known as sentences. Cheers.

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1779132
Share on other sites

pulling the fuse makes it 100% rear wheel drive until you refit the fuse.

you can make your car 2wd while driving along in 4wd. step 1, put your foot on the clutch while driving, step 2, turn the ignition off while your foots still on the clutch, step 3, turn ignition back on and foot off the clutch, now you will be in 2wd without having to pull the fuse out. to ensure your in 2wd the orange 4wd light will be lit on the dash. please note that this is only possible on the R32 GTR's. the car will automatically go back into 4wd mode when you bring the car to a complete stop.

hope some of you lucky GTR owners have learnt something new, happy sliding... B)

Edited by gtrgodzilla
Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1779600
Share on other sites

You can get a torque splitter than will do the job as well.

Dude refer post #2. That's what an ATTESSA controller is.

Overboost, yep, they can adjust it to your liking, from max split to no split. The search engine will turn up all the answers. :)

Heath I hope you've been behaving yourself mate! :) hehehe :blink:

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1780266
Share on other sites

The ATTESSA system in the R32 GTR is pretty good for its torque-split-ness. I notice it only kicks in (that is, the front torque guage shows a reading) when I launch hard from a standing stop or I go over slight bump on the freeway etc.

It will never have more than 50% of the drive at the front wheels anyway and to get that you wouldn't have time to notice what the guage is reading as you adjust the awesome slide you are in :)

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1783190
Share on other sites

Just for those that aren't aware, the torque split gauge does not measure a percentage, it measures kilogram.metres, ie torque.

A reading of 50 on the gauge does not mean you're driving an overweight STi :D

That said, when your GTR rolled out of the factory years ago with its claimed 353Nm. That's around 36kgm, so a stock car won't see 50

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1784364
Share on other sites

Yeah, happy sliding for me too yesterday then a bit of a drift around the corner, then the backend broke loose and more oversteer, then I put a bit more throttle in to get the front torque to pull me straight but...

Round I went 180 degrees, parallel crashing into the 30cm high kerb on the other side of the road.

Damn it sucks crashing and f*#king up your wheels, suspension arms front lip and spoiler, and throw in a front crossmember and cv joint too. Only happened yesterday arvo Just out of lithgow heading back to sydney.

My fault, going too quick around a corner.

Take it easy guys.

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1784425
Share on other sites

Damn Sean! I saw your car for the first time last week too! Well as long as you're alright mate.

I had a 'moment' coming down Hawkesbury Rd a fortnight ago on a Friday morning when the road was greasy. I was trying to suss out how the torque split works and I did a similar thing but *just* retained control (it was a 35kmh left into a 25kmh right I think). Learned a good lesson! No damage, never connected with anything but enough to speed up the ticker for a few k's.

If you're after parts, let me know, cause I bought a stack (bumper etc) when I had my car painted and have a fair idea of how much Nissan can sell them for.

Mark

Link to comment
https://www.sau.com.au/forums/topic/97961-r32-gtr/#findComment-1788062
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...