Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Doodz it might be a belt tensioner.Have you recently installed a heavy duty clutch?

definetly not the clutch either.

I would put money on it being a sticky lifter, especially since he changed the oil last week and with a different type :)

definetly not the clutch either.

I would put money on it being a sticky lifter, especially since he changed the oil last week and with a different type :(

My car is doing the same thing and was told it might be the lifters but someone else said its the injectors because its an RB26, dunno which is right but i want that sound not so loud, and its on idle aswell :)

My car is doing the same thing and was told it might be the lifters but someone else said its the injectors because its an RB26, dunno which is right but i want that sound not so loud, and its on idle aswell :(

The injectors are always noisy on every skyline i have heard, but on GTRs (especially older ones) the head does get a bit noisy, they dont have hydraulic lifters which when working properly are quiet, the head in a gtr will just be a bit noisy all the time with age

definetly not the clutch either.

I would put money on it being a sticky lifter, especially since he changed the oil last week and with a different type :P

that happened to my car on friday night too ..

hardcore knocking sound.. freaked out.

now the sound is gone ;o

The injectors are always noisy on every skyline i have heard, but on GTRs (especially older ones) the head does get a bit noisy, they dont have hydraulic lifters which when working properly are quiet, the head in a gtr will just be a bit noisy all the time with age

My car isnt THAT old.. its a '94 model (the last year they were made :P ) .. it was coming from the front of the engine/fuel rail ..

if i was to upgrade injectors would it be not so noisy? Because it sort of worries me.

My car isnt THAT old.. its a '94 model (the last year they were made :) ) .. it was coming from the front of the engine/fuel rail ..

if i was to upgrade injectors would it be not so noisy? Because it sort of worries me.

if it does make them quieter, good excuse to upgrade them :)

ok update...

mechanic found two problems that might be causing the noise..

water pump was loose, banging against itself.

and the ac tension bearing pulley was sqeeking

got both parts at justjap $183, but i bargins and got it to 180$ LOL. I think this was SAU price too..

My car isnt THAT old.. its a '94 model (the last year they were made :( ) .. it was coming from the front of the engine/fuel rail ..

if i was to upgrade injectors would it be not so noisy? Because it sort of worries me.

well by old i mean say more than 5 years old <_<

New injectors are quieter, but wont be forever! I wouldnt worry about it, just make sure they are clean and they should be fine, they are all a bit noisy!

dood go and get a long screw driver and listen to ur engine, this happen to all skyline...........so dont worry.......try using motul 8100excess.......and it would go away.....the lifter is tapping the top so it ok...

if u rev ur engine up and it tick,tapping...then it could be ur cam bearing.........

its all about the oil.

what viscosity is the motul oil your using?

25lifters can be very sensitive to changes in iol thickness. the oil feed to the head can also block up :blink:

undo the oil cap and see how much oil is getting up there.:

i spose the easiest way is to chech it with a friend with the same engine

ps. there should be enough oil to splash evry ware with the oil cap off.(just the odd splash out of the oil cap with a continuase swirl of oil around the cam lobes,if thats any help

cheeres

ok update...

mechanic found two problems that might be causing the noise..

water pump was loose, banging against itself.

and the ac tension bearing pulley was sqeeking

got both parts at justjap $183, but i bargins and got it to 180$ LOL. I think this was SAU price too..

So has the noise gone away or is it quieter.. Please give an update as i wanna know whats wrong with mine :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...