Jump to content
SAU Community

Recommended Posts

Hi fellas

Im in the market for the boost controller and would like to hear your thoughts.

What do you recknon is the one that stands out appart from apexi.I was having a look at Blitz SBC Spec S which is single solenoid boosting upto 1.2 bars. Seems very good, the down side is being a single solenoid.If you've got any suggestions please advise me of it

Thank you

Link to comment
https://www.sau.com.au/forums/topic/98407-new-boost-controller/
Share on other sites

I recommend the GReddy Profec B-Spec II.

The cheapest JDM EBC and it holds boost well. Comes with bells & whistles such as peak boost recording, gain settings, real-time boost reading (like a digital boost gauge).

However it is only single solenoid. Shouldn't be a problem unless you're going to be running huge PSI.

i run a Blitz SBC-iD, holds up to 2.5bar and it's dual solenoid.

So far have had no issues what-so-ever and it mounts very nicely in an R32 ashtray to keep prying eyes in the dark. Kind of nice that it has so many options and that you can pick them up used for about 300$

I bought it because everything in my car must be controllable from the interior and a manual boost controller doesnt offer that. It's a wonderful little toy purely because of that feature alone.

more info here...

Blitz SBC-iD

Hi fellas

Im in the market for the boost controller and would like to hear your thoughts.

What do you recknon is the one that stands out appart from apexi.I was having a look at Blitz SBC Spec S which is single solenoid boosting upto 1.2 bars. Seems very good, the down side is being a single solenoid.If you've got any suggestions please advise me of it

Thank you

Don't know from experience, but I've heard good things about the dual solenoid version of the one you're talking about. Blitz SBC Spec R. Autobarn have them retailing for $799, and the Spec S for $599, but I know you can get the Spec R (dual) delivered for $500 if you do your research :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Yeah, I don't believe the M35 uses a deadhead system.
    • Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...