Jump to content
SAU Community

Recommended Posts

Purchased a pair of R34 eyelids from MFX about a month and a half ago; finally got them painted and fitted today :D Decided to go DIY as the initial cost of the item didn't warrant a professional spray job. Besides, the item is so damn small it's going to be near impossible to funk it up~

Ingredients:

2 x MFX R34 Eyelids

1 x Can of Automotive Spray Paint (Nismo White)

1 x Can of Laquer

1 x Brick (to hold eyelids up above ground)

1 x Old Newspaper (to keep my driveway spotless)

Process took 2 days as I only began work Saturday evening. Applied 2 initial coats of white and left to dry overnight. Came back from a small meet-up today and finished it off by applying a final coat of paint followed by 2 coats of laquer.

Voila....

Eyelids fitted using double sided adhesive tape; had to be cut to size. Because these eyelids "flex" to a certain degree, fitment was clean and easy as you could bend them to the shape of the headlight :)

Photograph'os:

post-19974-1134893925.jpgpost-19974-1134893956.jpgpost-19974-1134893980.jpgpost-19974-1134894005.jpgpost-19974-1134894031.jpgpost-19974-1134894090.jpgpost-19974-1134894118.jpg[attachmen

=15363:attachment]

Still not sure whether I'll keep em on for good... a little undecided atm! Maybe they'll grow on me so they'll stay on for a month or two :) Good thing is that the adhesive is only on the plastic housing of the headlight which means removal is a piece of cake!

post-19974-1134894057.jpg

post-19974-1134894145.jpg

Link to comment
https://www.sau.com.au/forums/topic/98855-installed-r34-eyelids/
Share on other sites

I think you are 100% correct.... the East Bear ones look much more aggressive! But could that be because of the front bar it is partnered with? Could be a "package" feel rather than the single piece feel...

Anyways, thanks for the feedback guys :)

IMO, look's more aggressive yes.. but still needs more covering the light on the other hand - if you got the r34 GTR style grill it looks a whole lot better! I recon even without the lids.. just looks badass

Edited by ignuz

ignuz; I agree that the GTR grille would look awesome no doubt, but the amount of work + money to get that look is not justified in my books. There are just too many parts that need to be replace in order to achieve that look - and only so that the eyelids look more agressive, proves my point even more :D

oh :D Pictures don't mean anything anyway... always looks different in person :D

oh and also.. i can't tell if you've already done it or if it even can be done.. but if you take the lids off and just tint the glass a bit.. make it darker i think that would look alot more aggressive even without the lids.. that white on black look :D

Edited by ignuz
  • 4 weeks later...
  • 1 month later...

stan... those eye lids are alrite... the "Angry" C-West ones are ghey... I got a set and had em on the car for 3 days and couldnt hack it. Stock is the best... R34 headlights give the R34 that uniqe beefy look so why cover them up??

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...