Jump to content
SAU Community

Recommended Posts

Hey all,

Just a bit stumped on screws for attaching number plate to R32 GTR. Ive been to bunnings, total tools, even melbourne bolt co. and they don't have the right size!

Where did you guys get yours? If anyone has 4 spare i could swipe / buy, that'd be great. Cheers.

To the guys that mentioned M6 screws - would these do?

Yes, but why buy 100 when you need 4 ?? (OK, a few spares is good, but that's a bit over the top......) The few bolts you need will cost maybe $1 from a bolt specialist.

Just check the yellow pages for bolt suppliers in your area. Ring them and ask if they stock M6 x 15mm (length....just a suggestion) hex head bolts or screws, preferably plated (zinc). I'll be very surprised if the first one you ring doesn't have them.

Note that places like AutoBarn, etc will have them.

Turns out the same dude at Melb Bolt Co. who told me they didnt have to fit my application... as soon as i mentioned M6 "oh yeah, we got those"

Heh. Work experience ftw. :)

they'll have them at a repco or supercheap in a big stand. Champion brand.

They'll probably also have them at bunnings.. usually they are in a big rack with pretty much any other bolt you could care to name in a packet of 4-5 of them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...