Jump to content
SAU Community

Recommended Posts

Last week I had my GTR tuned on Boost98 for a dyno figure of 351rwkw.I used Boost98 after reading the article in HPI by Martin Donnon.

The car ran great with knock readings in the mid 30's,till the weather got hot,where I recorded low 70's.Nigel(Ice Performance) suggested we retard the timing 2 degrees and see what happens.Single digit knock,so we tried 1 degee retarted,where we got mid teens and left it there.The car is going back in for cam timing adjustments,so I just adjusted the timing in the settings screen,I had to do it every time I restarted the car.

Today,I was near a Shell servo that stocks Extreme100,so I thought I would fill up(47 litres) and test it out.I am now running 3 degrees advanced over the original setting on Boost98,thats 4 degrees more timing!!!!! and recording mid teens on the knock sensor.

I will be using this fuel on my next tune in the New year,highly recommended.

Between now and my next tune,I will try Ultimate to see how it compares.

Link to comment
https://www.sau.com.au/forums/topic/99217-boost98-v-extreme100/
Share on other sites

There are 2 Ethanol fuels.E10 has 10% and is sold by United as Boost98 and E5 has 5% and is sold by Shell as Extreme100.

Dyno figures are bound to go up dramatically as we had 365rwkw and had to knock out some timing using the obviously inferior Boost98.The 100 octane Extreme looks very very promising,allowing 4 degrees of extra timing while keepoing the knock lower,should also allow a little more boost.

Last week I had my GTR tuned on Boost98 for a dyno figure of 351rwkw.I used Boost98 after reading the article in HPI by Martin Donnon.

The car ran great with knock readings in the mid 30's,till the weather got hot,where I recorded low 70's.Nigel(Ice Performance) suggested we retard the timing 2 degrees and see what happens.Single digit knock,so we tried 1 degee retarted,where we got mid teens and left it there.The car is going back in for cam timing adjustments,so I just adjusted the timing in the settings screen,I had to do it every time I restarted the car.

Today,I was near a Shell servo that stocks Extreme100,so I thought I would fill up(47 litres) and test it out.I am now running 3 degrees advanced over the original setting on Boost98,thats 4 degrees more timing!!!!! and recording mid teens on the knock sensor.

I will be using this fuel on my next tune in the New year,highly recommended.

Between now and my next tune,I will try Ultimate to see how it compares.

which shell servo was this m&m?

Cnr Warrigal Rd and Centre Dandenong Rd Cheltenham,near DFO.

There are 5 shell servos on Burwood Hwy and 1 in St Albans as well.

thanks for that.

burwood hwy is a bit out of the way for me, so i'll have to try my luck in st albans.

Generally you loose power with ethanol blended fuels, so you have to advance the timing to get some of the power back. The good thing is, with careful tuning you can get good gains over the regular 98 RON stuff.

New 100octane shell fuel with 5% ethonal is what you want. you will not lose any power , you will gain timing,response and power.

I did some research ito fuel octane and detonation and have to wonder why the ethanol was added . I sort of though that the alcohol helped to make any condensation soluble but I'm beginning to wonder if slower burning high octane fuels need a bit of help at the cold start phase . The mighty 3 cyl G11 ran like a hairy goat at the first cold start on the Shell 100 but runs fine on it now . If anything it make a little better part throttle torque and the choke (showing its age here) is never needed .

It will be interesting to see if the other flavours of 100 octane fuels will have ethanol in them .

Cheers A

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...