Jump to content
SAU Community

Recommended Posts

Im looking to start a group buy for genuine RB25DET Idler Assembly replacement bearings.

After recently doing my own 100k service I was quoted $350 for the timing belt idler bearing and another $130 for the timing tensioner pulley bearing from Nissan.

I was also quoted $225 for the timing belt idler bearing and $95 for the tensioner pulley bearing from Just Jap.

I have managed to get hold of a supplier who is happy to do a group for $240 delivered on both the Idler and Tensioner bearings (Genuine Nissan Replacement parts)

Both of these a requirement when doing the 100k service when changing the timing belt, and is also a good idea when rebuilding your motor for peace of mind.

Looking for around 10 buyers to achieve this price.

Closing Date: 20/1/05

PM me for any further questions or details.

dscf02540fs.jpg

dscf02574tu.jpg

Link to comment
https://www.sau.com.au/forums/topic/99329-rb25det-100k-service-bearings/
Share on other sites

from memory i think you can get nsk bearings for about the same price or cheaper.

Tensioner NSK 60TB0683 EA7L 806

Idler NSK 56TB2801B01 ENSL 309

not geniune but still does the same job. anybody have any idea if the nsk's perform better?? i might be interested.

Yes they do come with the sleeve etc.

I started a thread in the maintenance section yonks ago when I did the idler/tensioner over a year ago.

The thread was titled fiddly stuff and if you do a search you will find the right part numbers in the thread.

They are cheaper than the genuine ones and I can't see any reason why they wouldn't last as long.

One guy got them cheaper than I could but he was in sydney.

From memory it was about 60 for the idler and 105 for the tensioner.

I've used NSK in all my vehicles and never had any troubles - they are good bearings.

Cheers

  • 5 months later...

yeah the nsk number for the idler is fine if you really wanna press them out bud ull damage the bearings doing this...hint vl rb30 tensioners FIT!!!!!

from memory i think you can get nsk bearings for about the same price or cheaper.

Tensioner NSK 60TB0683 EA7L 806

Idler NSK 56TB2801B01 ENSL 309

not geniune but still does the same job. anybody have any idea if the nsk's perform better?? i might be interested.

So these are the complete tensioner and idler assemblies to suit an RB25DET?

Found out today, CBC do a timing belt kit for RB25DET's, includes timing belt, tensioner and idler pulleys, cam shaft and crankshaft seals, for about $350.

thats not a bad deal. what kind of bearings do they supply in the kit?? genuine?

I'm pretty sure they are NSK bearings, which would be as good as genuine.

I wouldn't be surprised if the genuine ones are NSK.

I talked to Bearing Traders in Mayfield Newcastle, and they can get the bearings at a rediculously cheap price, i couldn't believe it.

Tensioner NSK 60TB0683 EA7L 806 $29.63

Idler NSK 56TB2801B01 ENSL 309 $49.76

I talked to Bearing Traders in Mayfield Newcastle, and they can get the bearings at a rediculously cheap price, i couldn't believe it.

Tensioner NSK 60TB0683 EA7L 806 $29.63

Idler NSK 56TB2801B01 ENSL 309 $49.76

Nice work :P I got a 100k service coming up and live in newcastle so this should help save me some money.

I only got my car a couple of months ago (98000km), and when I got it I knew it needed the timing belt done... but I didn't know anything about bearings.

I had it done at Caringbah Automotive Repairs & Service in Taren Point. The invoice I got says "T1040 Timing belt" but nothing about bearings. So after reading this thread I'm thinking it should have been done, and if so is the mechanic to blame for not knowing to do it?

I've just done over 100000km so I guess I should get it sorted. Wonder what other surprises are waiting to empty my wallet... :P

It depends who you talk too, I've heard SK say that it is not required to change the pulleys when you change the timing belt, but i'm quite sure it is recommended to be done with the 100000k service.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...