SKY 34

you have a pfc?

the front bit does not stretch long enough to meet the headlight...I intentionally cut a larger section to fit the Trust sticker in between you are right the nismo decal is approximately 60-70mm short, besides, those dimensions are wheelbase dimensions? also consider that at the door opening you have to leave quite a stretch to be folded into the door panel otherwise the decals will peel off if you accidentally brushed the ends

note that these decals are initially designed for R32 so it's sorta too short for R34~~ I have to stick the "Trust"sticker in between

I can get those stripes for $200 ~~

how long does it take to trim usualy?

ahh so he's off to getting married~~ I was told he wouldn't be in on December was wondering why... now I know~~ well if you are here congrats!!

hi, looking for silver colour R34GTT bootlid preferably with no holes cheers

><..I'll skip the lid~~ cheers

fatique..the rings are under repetitive dynamic loading... + the rings are always in friction

hi, as topic states, brand new and delivered within $1000 cheers

oops forgot to pm my adress ><

payment made yesteday with reference SKY 34 please change status cheers

hi, I'm selling my pfc for R34 GTT, only for manual transmision, it is tuned for : pod filter, intercooler, and 2.5" exhaust I've used it for the past 3months, reason for selling is because I'm switching over to wolf 3D The price is as stated above, inclusive the hand controler (sold) in very good condition also for sale a 600W monoblock$350 , kicker and 15" 1000w monoblock including box to fit R33 boot $350 If you buy both items I'll throw in an equaliser worth about $100 I bought the items second hand and did not install them at all, went for 2x 10" instead cheers I'm located in W.A

hi, I'm selling my pfc for R34 GTT, only for manual transmision, it is tuned for : pod filter, intercooler, and 2.5" exhaust I've used it for the past 3months, reason for selling is because I'm switching over to wolf 3D The price is as stated above, $800 inclusive the hand controler in very good condition also for sale a 600W monoblock$350 , kicker and 15" 1000w monoblock including box to fit R33 boot $350 If you buy both items I'll throw in an equaliser worth about $100 I bought the items second hand and did not install them at all, went for 2x 10" instead cheers I'm located in W.A

you have the actual picture of the rims? any damage ?

I'll be the second person interested with the boot lid~~

hi, sorry changed my mind can I get the small body cat + the dump instead thanks...so that adds up to $600? will make payment by wednesday...cheers

9% sexually active...huum lesser than I though~~

nah the east bear one look ugly...nyways try saking top secret abiut it...they have the diffuser and the lip attached together costing US $1065 mite still be cheaper than getting separate lip and diffuser... http://www.topsecretjpn.com/diffuserpro.shtml

I have a pfc and the car often just died while driving the first slow down after a hard accelerate... but I am able to restart when the car still rolls

umm try spraying AFM with contact cleaner first...

~~ I have second hand brand new momo for sale..I bought it without realising it is illegal to remove existing airbag <<-- my signature

They get the sound by sandblasting the blow off valve with HKS sand http://www.skylinesaustralia.com/forums/in...howtopic=110974 lol..I thought Bass Junkie was for real..I went...Wuuut the!! + club exec >< I think the sound is from a closed loop BOV. It isn't an open atmosphere. <<< and no...if you have a plumb back or an atmo BOV installed, once the throttle closes, the excess air between the turbo and the TB is either being plumb to before the turbo or discharged into the air...making no fluttering sound at all.....depending on spring rate/amount of air vented or plumb back I would imagine having a larger volume intercooler would produce a lounder fluttering noise due to larger volume of air closed off.....I think that is why the HKS GTR has such a loud fluttering noise.... also by having no BOV or bypass valve, as the throttle body opens again, there is a ready supply of air to be sucked into by the vacuum into the plenum...in contrast to having the air dispersed somewhere, requiring the compressor to work quite a duration to re-fill the vented air....so more responsive without the BOV...it will be damaging I suppose but who cares...they have plenty of turbos in stock, the main thing is to impress the press!! I think the ceramic turbine is only at the exhaust end...if I remember correctly, the intake is made up of sumthing different just to prevent the turbine from smashing to bits "ceramic blasting" the cylinder... the ceramic turbine tends to shoot out of the exhaust if boosted to about 1.0 - 1.2bar..or so I was informed ><....so the ceramic bit will not be affected whatsoever by producing the flutter.... I used to think that the fluttering come from the "sequential BOV" due to it's name "sequential"...it'll be amazing to note how many ppl think along the same line~~... and sad to say I eded up with a HKS sequential BOV I went ..huh where's the su-to-to-to-to-tooo sound... and buy those HKS sands...it works magic..my engine is all shiny remember to flush with turtle wax after~~

it cost more than $400 to do a proper job.. $400 prolly just bog the holes and do loacl paint job...whatever stuff they plug the hole with may fall trhough.....proper weld job cost more..I was actually quoted $1700...which I think is a rip off....

mate, when do I have to pay by?