Dan_J

cut? what a waste,guess you mean into a front cut, i hear arab's dont like coupes so that wud be to repair a sedan

was planing on bidding on it but prices got too high for an unrwc car

well look at that, the c110 gods must have blessed you

. the ecu water sensor has 2 wires coming from it, one is a ground or positive and the other is the sensor a aftermarket gauge has 3 terminals, power + , - (ground), sensor. T off at your cig lighter for +/- powers buy just scratching the plastic with scissors or a knife that isn't that sharp and wrap your connection around there and tape it up

far as i remember there was a thread on here about rb26 intake temps as they have a stock intake sensor and average was 45c. no idea on dangerous but at a guess 55+ just make sure its the ecu sensor not the one that goes to the cluster. the rb30 may run an ecu sensor aswell so give that a try if you can see it with the same colour/mark wire on the sensor as well as on the loom next to the plug on the ecu.

cud be the pod rattling on the body once higher rpm's make it vibrate more. put some cloth tape around whatever it is on with the body and see if you can hear it as i had the same thing also high intake temps result in detonation so keep an eye on that. u can use the stock ecu water temp sensor off an rb20 and thread a hole in your cooler piping if you wanna keep track and just hook it up to a water temp guage.

cleaning doesnt do much at all, if your spark plugs are old just buy new ones for 3-4 bux each and see if it does the job exhaust leak?

they work, they look somewhat out of place, most peeps in nz use them d1nz.com if u wanna search for pics

http://www.skylinesaustralia.com/forums/Sk...ts-t295125.html

not sure y your posting in this section the cables may fit dont think anyone has tested them yet, they will bolt on. not sure if u have to shorten or lengthen it, but u cant use the hand brake lever/ front cable as it only has one join coupling not 2 like the r32. u will need 2 drill out the hand brake mount spot welds and bolt in a r32 mount so u can bolt on the lever /front cable

hell no ^^ shud have just kep that damaged rear end, wud have been easier to pull, and cut and shut bits

once again i'm after rates Coil ID - 60mm Wire OD - 12mm # of Coils - 8 thanks

^^last i remember shells are 600 bux and completes are like 1200. unlike jollys they will sell cars, altho its a pretty fixed price damage/rust doesnt concern them

have used, been good. paypal acceptable too www.transdirect.com.au sure are cheap, just got a quote ($130) for a front bar postage which was better then sendsmart any one know of any cheaper for bodykits? * thread hi-jack in motion *

looking gud, needs dish, not lip they came as an option, its just a thick plastic sticker

bloody bastards, there was a reason y i asked em if i cud buy it just b4 they scrap it

as above just woundering how rare are the manual 4 door c210's ?and how much do they go for( not red book stuff) ? or is it fair game to just convert them if auto as their mainly auto ? manual conversions dont really stress me as i have done them before

put simply all s13 suspension parts will fit ,castor brackets will not fit but castor rod will r32 gtst rear stuff will all fit cept for lower control arms as they have a different coupling at the ball joint which needs u be grinded and bashed off( but seeing that u have r32 5 stud they will bolt up), unsure on hicas but is similar. front r32 gtst the sway bar shud be the only thing that fits so castor rods will not fit although you should be looking here! has been covered http://www.skylinesaustralia.com/forums/A3...ist-t93523.html

http://cgi.ebay.com.au/Datsun-240k-1977-GL...=item1c0fde84ec

or c: u buy a cheaper one that needs a restore from rust and you mod it how u want because u saved a shell that was gonna rust away anyway

i just assumed you didnt want to buy it, if your still thinking it over then no problem. well my plan with the car wud be to buy it, take it to scrap metal and watch it get crushed, i just get my thrills that way . do you mean if i wud part it out or repair it, if it took my fancy i wud be after repairing and restore.

^^^, yea i know, but the go wud be c it in person and make a offer

http://www.tradingpost.com.au/Automotive/U...ue&AdOnTop=

pm me info and price on the damaged one plz

seen it, was there looking for sum toyota parts, and saw it few weeks ago. asked if i cud buy it, they said no, i came back a day or 2 later and i asked again, they said they dont sell cars off the lot. i came there 2day to ask em if i cud buy it just b4 they move it onto scrap so it doesn't get scraped for metal and they said no......... bloody car murderers i tellz ya *crys*