msnismo

Hey Virgin Remember the fail boat photo of my car at Wakie??? That was the slicks letting go massively (dave was driving that one)... its all grip then its like ICE with no in between.... well that's how I find them anyways, but I kept pushing them as I couldn't believe how much faster we were getting through the corners compared to normal street tyres and the old hard semi's I had! (I do believe Cassbo reposted that photo up in the OP thread) Oh and don't flat spot em like I did my first go out on them.... It will always find the same flatspot all day under braking If you need some 265's ... there is a pile of em here

Do you know if it is a standard clutch? I found that someone had shortened the pin in the slave cylinder (they installed an after market clutch in a very dodgy manner), which then fell out of alignment one night and scored the seals creating a nice leak and lots of air in the system. Same problem, no clutch pedal. Either way, will more than likely be the master or slave cylinder that is causing your grief. Check to see if their is clutch fluid leaking down your firewall in the engine bay, or on the inside of the cabin under the carpet up above the pedals - common symptom of a leaky master cylinder.

Couldn't of said it better myself

^^ knowing my luck.. Dave and I will manage to break the unbreakable... lol Il think about it though... Il more than likely cave and at least enter for one of us to drive it

damn it.... Weekend before Bathurst so we don't know if Dave is working all weekend or not Annnnnnnd I am about to put my car up for sale, so really shouldn't be taking it too the track .... should I ? But all in for helping on the day guys

OMG... I'm Baaaaaaaaaaaaaaaaaaack And Dave and I are in

PM Sent

Got a front bar ????

well umm both sold pending payments ... Still in shock at how quick...lol Will let you know if either fall through.. Cheers Anna

Hi all, Due to yet more upgrades my aftermarket exhaust system is up for sale. Prefer local pick but should be able to send interstate via pack and send. Details: 'MetalCat' into a full R*SR (Invidiia) 3" stainless exhaust system. Was on my car from Japan, and cat was added a few months ago. No dents and only a few scrapes on the cat courtesy of a new speed hump at work ... There are 2 mufflers as well as the cat.. never had a problem with noise, very quiet compared to most... only gets noisy around 5,000rpm which over the test limit anyways. Direct bolt up for anyone with a 3" dump and an R33 GTST. Only removed due to finally being a restriction over 370rwkw.. OR look at evil_weevils ad as he has a 3" dump for sale Will NOT separate the Cat as it is not flanged at the rear and is directly welded to the exhasut system. It is flanged ready to bolt onto a dump pipe at the front. $600 ono pick up (cat alone was $400 0dd!) Photos up tomorrow as cbf going out in the rain --------------------------------------------------------------------------------------------------------------------- Secondly, during our recent move, I found my E-boost 2 that was in my other car. Details: White face, box and instructions included. Mounting cup etc all there, only thing that may be required are some t pieces and vacuum line.... think I used it when I returned it to stock setup. Was hardly used and is "as new condition" $350 ono posted anywhere in Oz. Again, pics up tomorrow.... Post here or PM if interested.

Woooooooooooohoooooooooooooo Dave & I are IN!!! and change your sig please...

Spotted SL.32.OW at Prospect this afternoon

sold pending deposit tonight

bump Make me an offer guys Need the storage room !!!

Arias in my car... although the ring gap has been tweaked a little from the specs they recommend Picked up from CRD for a decent price no dramas.. everything there including the sticker... lol Although I wasn't looking for the cheapest, I needed them that day and it was 4pm on a friday! From memory they were $1290 .. all up it was $2k with rods (eagles) NYTSKY (dave) actually gets a good deal on pistons and rods (CP I think, could be another brand though) ... the link is in his signature. Most go 20 thou over which is 86.5 for the pistons

lol.... I had it tooooo!! Just never installed it!! Oh btw Adam... I have two federal's (18/40/235) with your name on them for the next drift day.... just like new... except for about 1 inch on the inner edge Swap sides and they will get you through another day Actually anyone without the camber I have could use them on the rd as the part chewed up wouldn't touch... lol

Yah... they are going for the kw's angle this time round... so I offered to lend my bish.. Might take you up on that! BUt looking for a datto so bathurst isn't entirely out yet.... I missed out last year due to a spun bearing.... Just too many things on this one weekend!

well seeing my car will be at the auto salon aka fashion show.... and dave will be working at OP as its the last round of the V8's..... il volunteer to bring his car *over Dave's dead body more than likely* Im allowed to take it by myself to work and stuffs... but to the Bathurst might be pushing it!! I'd swap my black bish in a heartbeat for Daves car ... ....its sounds cool...and its sooo hard to drive which makes it all the sweeter

well missed it last week (forgot) ... watched half of it tonight.... wish I'd missed it again I'd rather watch 5 year old episodes of the UK one anytime...

zomg.... your back!!! no wai!!! Spotted teh same..... and Sheng driving away in my baby

Annnnd the zed has left the building .. Car sold... Thanks for the interest!

Well another bit to add to the list - HKS fuel defender thingy was found in the kick panel next to the ecu.... Think il dig around for more hidden HKS stuff!

And heres some more including the known rust spot in the tailgate and one bit on the drivers door.

oh damn... dont worry about PM then

Nah Im in Sydney.... but PM sent!