cheez

not really, may have been a small mis balance. it wont go straight away, will go over time as the balance issue will become bigger. hes only had the car running 12psi for 2 months and then he had it at 16 and 18 for the last 4 weeks or so b4 it went. ive personally seen the car and the way tony drives, plus if something went through it like dirt, it wouldnt have caused this, would have ceased the shaft not made it shift its balance and bash inot the compressor housing.

thats wat i was thinking. has to be the shaft that isnt balanced and has let go after some pressure started running through it. the smallest warp or bounce that the shaft has will be magnified when it spins faster. thats wat makes it loose.

IMO 10psi is a safe boost level. i wouldnt push 12psi all day every day. especially on a stock turbz.

if u plan on making 250rwkw then u definitly need to upgrade the fuel pump. no u wont need a new regulator. not worth upgrading unless u want big hp. exhaust and intake manifolds that are standard on the rb25det are good for almost 300rwkw. front facing plenums are good as a cosmetic upgrade early in a build but yeh standard plenum is fine. exhaust manifold wont need to be changed unless u wanna run a high mount turbo. nowdays most low mount turbo's can be run on a standard manifold with an adapto plate. for 250rwkw, turbo injectors and a pump along with a good tune 250rwkw is yours soon.

yeh electric sunroof, tilt and slide back.

those hollandia sunroof's are good. but 2k is overpricing. i got quoted about 1200 fully installed. with summer here i am definitly thinkin about it.

list updated. those interested in the pre meet, its now up in the events section. state there that your coming.

hey guys for all those asking, there is a pre meet at the Kmart in Campbellfield same as the last GOR Cruise i organised. Time: 8:00am depart at 8:45am. Meet: Kmart Campbellfield (cnr of Mahoneys rd and Hume Hwy) State your interest here. i will be departing at 8:45am. those that are running late will be left behind unless u contact me on my mobile. u can get my number by pm'ing me. People Coming: Me (cheez) Eddieeeee-ro Josh33 russo1 candy33 DNGRUS + 1 assyrian4eva nismo_GTS cheers daniel

finishes at 6 tonight. i was there with R33GOD, stand looked good guys, im hoping to have my baby dolled up and ready for next year in march. If SAU Vic has a stand in march ill be there. got some nice shots there.

mini meet will still be the same as last tym. ill organise the post by the end of the weekend. list updated

check out the group buy section, there is a GB on a GTS badge. same as the GTR badge but an S where the R is.

from the looks of it, its just the resin that is damaged somehow. maybe something being put on the bonnet or whatever. t fix something like that your gonna need to sand the resin over the whole bonnet and re-resin the whole thing. its not a small job, 1600grit plus all over then finish with 2000. then resin coat and sand again and resin, bit of work. if ur not experienced with sanding or fibreglassing, id recommend having a professional do it for you. might cost about 300-400. but then again, u could alwys leave it the way it is.

is it glued on or is it just stiff to get off? either way if u plan to put a stealth wing on i would just use something to pry it off. at the end of the day that area will be covered with the stealth wing. also if ur getting ur wing sprayed u might as well spray the boot again at the same time. wont cost u much. maybe extra 100 - 150

are u able to post pics of what ur talking about?

heres wat i did i got gtr grill on my gtst. went to autobahn bought mesh and lettering and done.

has it got hand controller?

if u gonna upgrade ur turbos then do pump and injectors too. be safe rather than sorry.

ring rotormaster in campbellfield

good to see some first timers coming down for a cruise should be a good day and hopefully the way the weather is shaping up should be an awesome day. list updated

hey guys i know its short notic but im taking the line down to elwood beach for a cruise. ill be there at 8:30. if u guys wanna come down and say hi by all means. hope to see some other skylines down there. daniel

was ur boost gauge and boost controller linked off ur cd player? check that fuse.

thats true al, get 1 that ur tuner is comfortable with. speak to them. also if u got 3k to spend, 2k for cmp, 350-400 for tomei fuel pump and the other 600 left over get urself a boost gauge if havent already got 1 and ditch the manual controller for a hks ebc or an ebc that ur tuner knows how to tune with the comp properly.

if u want a t04 i can get u 1 off pav, he's selling his but u'll need to change the rear housing. its got 1.15 rear that came off a truck i think. hes asking 650 for it as is with braided oil line i think. check out the for sale section.

so what u gpnna do now? since ur hiflow is busted up u gonn repair or invest in a different turbo?

power fc's are a great and readily used aftermarket ecu for skylines. you can also go with a microtech lt12 or even the wolf v5. IMO i would go power fc. real easy to tune, just a bit hard to find as apexi stopped making them for r33. search the fo sale section but a PFC will cost u between $1000 with no hand controller to about $1600 with 1. BTw, 14psi boost on stock turbo? are u insane? how quickly do u wanna blow it.