Ma-Jik

I'll do shipping for $200, alternatively below are the specs (weight and size) and you can arrange your own shipping quote. CM 58x58x30 11.5kg per box Shipped from NSW 2204

Selling my XXR 527 wheels. These are 18x9.75, offset of +22 and are 5x114.3 (5x100) multi stud. I bought these off a member here about a year ago with intentions on putting them on the Stagea owned at the time but ended up selling it before ever putting them on the car. I believe the previous owner of these wheels didn't put much kms on them as they are in near perfect condition, just a little scratching around the stud holes (as pictured). These wheels should be a great fit for GTR's and Evo's - Previous owner had these on a r32 GTR. $880 - Pickup, Shipping can be arranged (wheels are boxed up and ready to go)

2000 NISSAN STAGEA RS4S - FACTORY MANUAL - RARE FACTORY DUAL SUNROOF 2000 NISSAN STAGEA RS4S - FACTORY MANUAL - RARE FACTORY DUAL SUNROOF Engine/Running gear etc HKS 3inch catback, highflow cat and 3inch dump Just-jap aloy radiator + Silicone hoses Front mount - Unsure of brand Apexi power intake pod filter, in Just-Jap airbox and silicone intake R34 GTT break conversion, with slotted DBA rotors Cusco coilovers Whiteline sway bars front and rear Rear adjustable camber arms HICAS delete kit Front adjustable castor rods Exterior R34 GTT wheels Freeway Dolphin rear wing Rhino Rack roof racks with air deflector Tinted windows Dual sunroof Interior Electric leather seats Tinted windows Original boot mat, plastic boot liner, Cargo net and parcel blind Nismo Duracon Shift Knob Nismo Floor mats Apexi boost gauge Extras DAYZ Rear bar - Needs to be painted to match the car DAYZ Front bar - Needs a lot of work it has been cut up to remove the number plate and the vertical bars, it also has some damage, but with some plastic welding, some fibreglassing and paint it would look great on the car. Original parts included in sale Factory cloth seats Original dump and compliance cat Original intercooler pipes, etc. Original intake parts airbox, pipes etc. 122000kms on the clock The condition of the car is fairly good for the age, no accident damage. Engine and drivetrain are in great condition Paint is fairly good condition, some parking lot scrapes here and there but overall it is good for its age. Headlights are hazy Interior is clean and has been looked after, leather seats have some slight wear (mainly drivers seat) I’ve owned the car for about 5 years, previous owner was the owner of a performance garage so it has been well looked after and serviced regularly. In the past 5 years I’ve only put around 12,000kms on the clock. Contact Nick on: 0433 288 751 or [email protected] $11,500 ono

Hi Mate, do you have the plastic guard liner from the drivers side?

As title, I'm looking for a Dayz C34 rear lip and a Driverside front guard inner plastic splash.

You could try a bicycle shop, a bottom bracket/headset c-spanner might be able to be used for coilovers (they come in a variety of sizes) assuming thats what you are trying to adjust. This is an idea I've been toying with in my head as I have coilovers without a c-spanner, but I do have a couple of bicycle c-spanners in the garage I need to check if they fit, but from a glance it looks like they might do the job. Hope this helps.

Hi guys I'm after a drivers sider plastic mud guard. Location Sydney. Bonus fun fact: My drivers side guard caught some crazy wind on the freeway last week enough to make it contact the wheel and rip itself out at 100k's... fun times.

Does anyone have a definitive answer on what fits a RS4S? I've read every page of this thread and I'm even more confused than when I started. I hear we have a bit more room at the back and I'm looking for something quite large either 18 (perhaps 19) x9.5 or x10.5 all around but I'm a little unsure of offsets front to back (back particularly)

F***ed up my rear bar a few months ago, I need a new one. Pearl white preferably, although does not matter much as I will probably re-spray. Can be cut for DAYZ lip as I will be putting one on it. Sydney pickup preferred, but would be willing to pay for shipping if the price is right.

I installed, s2 leather seats in my s2 RS4S and there is no wire there, I found a wiring diagram somewhere on these forums on how to wire it up no problem, if you have any Q's send us a PM, I'm happy to help.

Hey mate, I've done a little research myself couldn't find much on the lock bars although I hear the z32 may be the right size. However in all my research I think the best solution would be to fit a Driftworks HICAS removal kit which is a universal mount for all HICAS cars Take a look you'll see how instead of putting a lock bar in the middle it instead removes the bar all together and uses it's own brackets, it's a little more expensive than a lock bar but seems to be a better solution, lighter weight as well. http://www.driftworks.com/driftworks-total-hicas-eliminator-kit-for-nissan.html I do not have one of these kits so if it works with the C34 rs4s I can't confirm 100% but from the looks of how the eliminator kit works and what I've seen under my own car it looks like it would. This is potentially something I will be doing to my rs4s soon so if I do I will keep you informed as to how it goes.

PMed about the cat the other day

I'm keen. Count me in

Sorry, Sydney Inner West.

As the title says, I'm looking for the carpet from a R33 GTR in any condition - stains, tears, cigarette burns whatever doesn't matter, I'm just using it to check wether the Stagea uses the same size/shape carpet. - This way if it fits I can order a new carpet from a supplier that has a template for the r33, if not I guess I have to get something custom made. The cheaper the better, I'm really not prepared to spend much on this as i'll probably just throw it away after. Alternatively if you have a carpet you would be prepared to lend me for a weekend in exchange for a 6pack of your favourite brew this would also work.

Any idea if the cc03: Concave: Deepest - Size: 18x9.5 , Offset: +15, will fit a C34 with r34 GTT brakes I think Offset and width will be fine, just worried about brake clearance as I do not want to run spacers.

Hi All, I'm currently trying to make the interior of my Stagea Series 2 RS4S a little more comfy and I would really like to upgrade the carpet to a superplush cut pile type carpet in black, problem is no one stocks these for a Stagea so a off the shelf fitment may be hard. However, during my searches I have noted that some seem to think the floor pan of the c34 Stageas may be similar/the same as a GTR, (r33 in particular) as the front seats from the GTRs r32-34 bolt straight in. In addition to this the Nismo floor mats for the c34 are the same as the r33gtr (judging by product code). From a quick google search it seems that the Stagea seems to be 30mm wider than the Skyline, but this is probably not a big deal when it comes to the carpet as there is usually a little wiggle room. Can anyone confirm/deny wether the floor pans are indeed the same or similar enough? Failing that does anyone have a spare r33 GTR carpet (in any condition, I could borrow for a weekend to check)

Hi All, I thought I would introduce myself, the names Nick and I've recently purchased a White Stagea Series 2 RS4S. Will post pics soon! I purchased this car late last year off Indy as IS Motor Racing, I've known Indy for a long time as he helped me build and tune my old Evo 8MR. When I picked up the Stagea it was close to stock bar a few small mods r34 GTT brakes and wheels, Cusco coilovers, HKS catback and rear camber arms (unknown brand). I couldn't just leave it like this so I started modding straight away. So far I have changed the front and rear sways + links to whiteline items and Indicators to Nismo smoked type. I have also purchased a few other bits n' bobs I'm currently fitting or modifying: Factory electric Leather seats which I'm in the process of wiring in - no loom on the RS4S for this unfortunately (Fairly easy job to fix anyway) Will take photos of the process and post DIY. HDI FMIC kit - need to have an exhaust shop make up another pipe so I don't have to cut under the battery tray. - Any recommendations where to get this done in Sydney? 3" dump pipe 3" cat - spare off my old evo, need to get an exhaust shop cut and re-weld the flanges DAYZ front bumper - I have cut out the numberplate mount and the vertical running supports to give it a wide mouth look and I am now in the process of cleaning up the holes left by these by filling with fibreglass, I have been taking photos of the process and will provide DIY once finished. Also since buying the Stagea I have cleaned up the yellowing headlights, and given it a good detail - which was subsequently ruined the next day when it rained "typical". After all this is done the next job is removing that pesky HICAS using a Driftworks HICAS removal kit and get some wheels without the weak offset and width of the GTT wheels. For a wagon especially after coming from a Evo I'm quite surprised how well it handles.

I have SMSed you, waiting on reply.

I have the 2 side mesh pieces you can have for free, sorry I don't have the centre piece. I plan to replace all the mesh in my bar with new mesh.

Sorry to dig up a really old thread, but did anyone confirm wether the z32tt HICAS lock bar fits the c34? I have been searching all over the net and I can't seem to find anything, If not I may go the route Darren went and cut and re-weld the tabs on a R chassis HICAS removal bar.

Any photos of the Bonnet?

Hi guys, I'm after a set of R34 GTR wheels for my Stagea. Tyres would be a bonus but not necessary but must include centre caps. Condition - I'd prefer wheels in great condition with no scratches or gutter rash. However if you have a set with a bit of rash/scratches that you are willing to let go at a reasonable price I may take them and have them repaired. Sydney pickup preferred Cheers, Nick

Hi I own a Nissan Bluebird Attesa and I am looking for some decent brake pads for track use, unfortunately my search has been difficult at best. Because of the rarity of the car and the fact it uses different front break pads the local model. In my searches for pads I have discovered that the bluebird uses the same pads at the front as the r33 non-turbo. So basically I'm looking for some product numbers for r33 non-turbo brake pads that will be good for track work. Any help would be appreciated, sorry if this has been covered I have done a few searches and had a browse and haven’t been able to find anything. Cheers, Nick