Bl4cK32

I had oil temp, oil pressure, and water temp via the pfc hand controller. From studying it at various times, i found oil and water temps seemed to follow each other. If the water got hot, the oil temp followed. Oil pressure was a real good one to have, because if temps were ok, but no pressure....bye bye engine.

Update: R32 bushes Sorry guys, ive been in contact with Noltec for about a week regarding their stock of r32 bushes. I rang over a week ago asking if they had any in stock, and they only had 2 sets. They told me the next run would be last friday - which didnt come in. I rang again today (interstate calls for me yay!) and the guy tells me that Noltec themselves ran out of crush tubes, so the place that makes the bush couldnt make any.... The guy there is trying to track me down at least 5 sets for you first 5 guys, and hopefully ringing me back today with good news. Im pushing them to make more dont worry... sorry guys, its been out of my hands but hopefully we should see some soon. Thought i better let you guys what the deal was.

Saliya, could you get me prices on stuff for my gb. It seems your Nissan dealer is a fair bit cheaper than mine. I have the r33 series 1 box. I need a complete bearing set, but wouldnt mind a price on parts required to rebuild the whole box too (like complete syncro set, gaskets, and any other bearings/seals ive missed) Only thing i dont need is the gears themselves... Your help would be much appreciated

bl4ck is because im of african/american descent, and 32 because im 32 years old.... 'sif black 32...what i drive....

Ive got a gtr front bar (copy) on my car now. Its coming off in a few weeks, as im changing to something else. It needs a little paint, but its overall in good nick. Its been reinforced with fibreglass along the front inner edge as well... You are welcome to buy it if you like Id only be after $220 odd...

Id say with brand new pads in there, u might have glazed them as said above. You may have to take out the pads to check, and scuff em up a little. When bedding in my last set of pads, you could really smell em, and see a little smoke... Procedure seems extreme, as they are track pads

Hi, ive got a r32 gtst reinforcement bar (the metal rio) here in perfect nick (uncut) Im after a r32 gtr grille as well. Will pm you about a swap

Unfortunatly I live in Adelaide. It would have to be done by a diff place (ie 4x4 or a workshop capable) to setup clearances etc. I heard manual ratio was 3.9 and the auto was 3.7? If yours was 3.9 it would be better for me... Yes its just a swap of the cw& pinion. You can get the speedo re-calibrated at some places.

S15 runs a r200 shortnose diff with a helical centre. Skylines (r32/33) runs the same diff, except with a vlsd centre. The centres have to be taken out to swap over the cw & pinion(so u can keep your hlsd ) R33 is 4.1 and r32 is 4.3. What ratio are u running atm? I may want to swap my 4.3 for a 3.9 if u are interested...

I used the rb20 sump. The engine builder just bent the rear fins to clear the crank....

second one is going ahead as I have enough orders for it already. If you want a set pm me.

Maybe the guy thought he was taking the piss out of gtr owners. On the note of wtf for holdens....i saw a vl commadore the other day and it had like a vx body kit on the damn thing. It was like vl from the lower kit up. Looked totally farked..

nope.

You have to space it down due to the rb20 sump on yer rb30 sitting lower, as said above. Whiteline do make custom swaybars (im sure i read SK state somewhere) which shouldnt be too costly...depends if the spacers affect the way the swaybar works or not. Need a suspension guru to answer......sk?

$550 delivered www.perfectrun.com.au

I can Mig weld (ADR Approved), and solder electronics.

willing to separate black l/r fenders and s/skirts? (Maybe front bar too )

anything from a short nose r200 lsd 3.7, 4.08 etc. will fit. I got a 4.3 in my r32 gtst. I wanna swap it for a 3.9 though

noice

yes i am serious, and no i wouldnt regret it:) $100 later and a rb30 bottom end....

Yer i see more and more r34's these days. Particulary 4 doors. I wouldnt mind swapping my rb30 r32 for a nice r34.....anyone wanna swap?

You can, but u will be included in the second group of guys. The first set is about to be ordered once stock is in, and hopefully there is enough stock for the second order to go through after as well...

I got quoted around $550 for a full syncro set for the r33 box, and $450 for a full set of bearings for the same box. So all up its like 1k for a full rebuild (minus the gears)on my box...

All parts SOLD pending payment.

all pm's replied and sent