Jump to content
SAU Community

sydking

Members
  • Posts

    2,094
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by sydking

  1. Ill come pick up boot interor and parceahelf if sale falls through
  2. ok so these are what im trying to install into back of R33 S2. They are 6.5" and i was told when i got the font splits done that these wont fit the back, So i have made a custom 6mm parcel shelf to get these to fit. ( for all i know they could fit in std shelf ect) So. This is how to Stock speaker is set up, With the small clip in Now This is what i have to work with, So not sure how to set these up, And also have a amp sitting on the back floor to hook up to. No idea were to start. Last up is the Bracket. can i use this mount? can only get one bolt to line up so im not sure what to do here. Or is the idea to have the speaker cone sitting on the MDF parcel shelf. screwed into that then lowered down to the spears holes in the back. Cheers all.
  3. jst called local nissan, GTst wheel studs are $4.20 a each. ive got GTR front hubs....And belive it or not...GTR studs are cheaper at $4. Also front studs are diffrent size to the rear...But i was told they dont have acsess to the size specs. So thats pretty useless.
  4. Cant find any info on this, Possible to buy aftermarket wheel studs? Just a peice of mind thing really.
  5. looks like stock nissan tourque specs are 98-118nm, Not to sure how it works and why there would be 20nm space.
  6. E85 and wmi not possible on the same set up I take it mate?
  7. Hmm 350z rims so stock nissan spec on stock hubs, were do I find torque sepcs for the spacers? And even the wheels?
  8. http://www.hubcentric-rings.com/how_to_install_hub_centric_rings/ Something like this seem to be a MUST have when using hub centric spacers.
  9. Getting a set of hub centric spacers. These are something that need to be installed corectly, People have been running these even on the track for yeard with not a problem. Even Checked on a couple other fourms and the Off road guys are using them no problems in there 4x4s. So. What is the best and safest way to go about it. Toruqe the lugs proplerty to the right ammount Loc-tite to be safe. Ive also heard people mentioning Rings will be needed to make them sit on the Hubs, Nissan use a 66.1 and most spacers are a 77? Now, The whole idea with hub centric spacers, is the wheel still sits on the hub, Not on the lugs.
  10. ok, 25 mm hubcentric ichiba spacers should be on there way soon, Will be on a set of 18x8 +30 offset all around. Will post pics once installed. Also someone was mentioning to me that with spacers the arms of the car will naturally toe in casueing camber? can anoyne shed light on this? Or it was lowering the car will naturally casue camber. a little confussed on this
  11. Looking at the 26 dyno thread....the last handfull of -5 set ups arent over 320kw and most are 20PSI +
  12. ive gone form 33 gts seats to 32 gtr, Much lower, Much more hugging
  13. Good question I spose its all the usual though, Built top and bottom end 26 with cam shafts, intake cam gears ect ect, 87mm cp piston kit, hks step 2 valve springs. Dont really need to name the rest PFC 3.5" exhaust, Nismo Front pipe and 34 GTR dumps. Decat 34 gtr airbox Stock gtr cooler 4.11 Gear ratios
  14. as in a +25 offset on 8inch wide? so in other words just add a 15mm spacer to what i have and they will sit flush all round, Yes wider wheels ofcourse, But these are what i have for now.
  15. plenty people have run stock cooler on that sort of power...So ive heard?
  16. Ok, so r33 gtst, have a set of 18x8 inch +30 offset all round, looking into a set of h&r trak+ hubcentric bolt ons, what size will I need to fill stock guards Real nice, also sitting on cusco zero 2r coilover.
  17. Deposit taken and nothing since, back up for sale. Previous buyer contact me for deposit back, cant wait on this any longer. Open to offers
  18. -5s on a 2.8 with e85 would be very diff to a 2.6 on 98.But yes looks like I'll come check out the texi.
  19. Will have all supporting mods, just on 2.6 capacity. Surely someone has this set up?
  20. I am looking to do the same, there are kits available, but I was hoping for std Nissan ones
  21. Im putting gtr cooler in a gtst shell, go for it mate. Been done plenty of times
×
×
  • Create New...